Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - mborras

Pages: [1]
1
Same problem. Any solution?

2
I've got the same problem. Did you find a solution?
Seems that only sistem apps are mantained.

3
Android / Re: Android Screen Rotation
« on: January 23, 2017, 11:12:03 am »
After looking for into Android source we detected that the propertie "rotate_screen" must be grater than 1 to rotate the screen.

Settings.System.PutInt(ContentResolver, "rotate_screen", 1);

4
Cubieboard v1 Android (A10 Based) / Re: Screen Trimmint resets after boot
« on: January 23, 2017, 11:03:38 am »
Any Idea?

5
Hi @alex

What change did you do to get working the touch panel? Can you give me some advices?

-Marc.

6
Projects / Re: LVDS 18.4" with Touch Screen (resistive) - FULL HD
« on: March 03, 2016, 03:43:09 am »
Hi again @lex!

Can you say me which is the touchscreen provider that sold you the touchscreen ?

Marc.

7
Cubieboard v2 Hardware (A20 Based) / Re: Pinout for LCD.
« on: December 09, 2015, 06:14:30 am »
At the end we have changed the board and it solved the problem. Thanks for all!

8
Cubieboard v2 Hardware (A20 Based) / Re: Pinout for LCD.
« on: December 04, 2015, 02:15:28 am »
Thanks. I'll try!

9
Cubieboard v2 Hardware (A20 Based) / Pinout for LCD.
« on: December 03, 2015, 02:50:00 am »
Hi! I'm Marc!

We are working with a cubieboard2 (A20) and we want to burn an Android image into it. we have this LCD https://www.olimex.com/Products/OLinuXino/LCD/LCD-OLinuXino-10TS/open-source-hardware made for  A20-OLinuXino-MICRO device.

We created a board (this board is in production so we can't change it) which connect each pin from the cubie to the LCD connector. Cubie sends red color in lcdd0 (from lcdd0 to lcdd7) and blue in lcdd16 (form lcdd16 to lcdd23), but the problem appers because the LCD recieve blue through lcdd0-lcdd7 and red through lcdd16-lcdd23.

We try to swap red and blue changing the script.bin:
Code: [Select]
[lcd0_para]
lcd_used                = 1

lcd_x                   = 1024
lcd_y                   = 600
lcd_width            = 0
lcd_height          = 0
lcd_dclk_freq           = 51
lcd_pwm_not_used        = 0
lcd_pwm_ch              = 0
lcd_pwm_freq            = 10000
lcd_pwm_pol             = 0
lcd_max_bright = 240
lcd_min_bright = 64
lcd_if                  = 0
lcd_hbp                 = 158
lcd_ht                  = 1344
lcd_vbp                 = 25
lcd_vt                  = 1270
lcd_vspw                = 3
lcd_hspw                = 20
lcd_hv_if               = 0
lcd_hv_smode            = 0
lcd_hv_s888_if          = 0
lcd_hv_syuv_if          = 0
lcd_lvds_ch             = 0
lcd_lvds_mode           = 0
lcd_lvds_bitwidth       = 0
lcd_lvds_io_cross       = 0
lcd_cpu_if              = 0
lcd_frm                 = 0
lcd_io_cfg0             = 0x00000000
lcd_gamma_correction_en = 0
lcd_gamma_tbl_0         = 0x00000000
lcd_gamma_tbl_1         = 0x10101
lcd_gamma_tbl_255       = 0x00ffffff

lcd_bl_en_used          = 1
lcd_bl_en               = port:PH07<1><0><default><1>

lcd_power_used          = 1
lcd_power               = port:PH08<1><0><default><1>

lcd_pwm_used            = 1
lcd_pwm                 = port:PB02<2><default><default><default>
;lcd_gpio_0              = port:PH15<0><0><default><default>

lcdd0                   = port:PD16<2><0><default><default>
lcdd1                   = port:PD17<2><0><default><default>
lcdd2                   = port:PD18<2><0><default><default>
lcdd3                   = port:PD19<2><0><default><default>
lcdd4                   = port:PD20<2><0><default><default>
lcdd5                   = port:PD21<2><0><default><default>
lcdd6                   = port:PD22<2><0><default><default>
lcdd7                   = port:PD23<2><0><default><default>
lcdd8                   = port:PD08<2><0><default><default>
lcdd9                   = port:PD09<2><0><default><default>
lcdd10                  = port:PD10<2><0><default><default>
lcdd11                  = port:PD11<2><0><default><default>
lcdd12                  = port:PD12<2><0><default><default>
lcdd13                  = port:PD13<2><0><default><default>
lcdd14                  = port:PD14<2><0><default><default>
lcdd15                  = port:PD15<2><0><default><default>
lcdd16                  = port:PD00<2><0><default><default>
lcdd17                  = port:PD01<2><0><default><default>
lcdd18                  = port:PD02<2><0><default><default>
lcdd19                  = port:PD03<2><0><default><default>
lcdd20                  = port:PD04<2><0><default><default>
lcdd21                  = port:PD05<2><0><default><default>
lcdd22                  = port:PD06<2><0><default><default>
lcdd23                  = port:PD07<2><0><default><default>
lcdclk                  = port:PD24<2><0><default><default>
lcdde                   = port:PD25<2><0><default><default>
lcdhsync                = port:PD26<2><0><default><default>
lcdvsync                = port:PD27<2><0><default><default>


But it seems that has no effect. Anyone knows any solution that does not involve changing the board?

Thanks for all and sorry for my english.

Marc.

10
Did you discover something? I need to read the voltages sended by a temperature sensor.

thanks.

11
Projects / Re: LVDS 18.4" with Touch Screen (resistive) - FULL HD
« on: June 05, 2015, 02:05:52 am »
Thanks for all @lex !  :) :)

12
Projects / Re: LVDS 18.4" with Touch Screen (resistive) - FULL HD
« on: June 04, 2015, 11:41:09 am »
Thanks for the info @lex. But for a bigger screen (15 or 18.4") I have to do the same work? Doesn't matter the size if both use gt811?Am I right?

13
Projects / Re: LVDS 18.4" with Touch Screen (resistive) - FULL HD
« on: June 04, 2015, 03:29:35 am »
Thanks for your reply @lex  :). I'll try it.

14
Projects / Re: LVDS 18.4" with Touch Screen (resistive) - FULL HD
« on: May 28, 2015, 05:44:28 am »
Hi!

I'm trying to do the same you do in https://drive.google.com/file/d/0B7A7OPBC-aN7bFFURkdLVkZGckk/view . Can you give me some instructions to achieve that. I'm working with a cubie2 (android, kernel 3.4).

Thanks in advance.
Marc.

15
Did you have any progress? I have same problem with a 3M touchsreen.

Pages: [1]