December 06, 2019, 10:47:36 pm

News:

Have you visited the Allwinner Chipset wiki? - http://linux-sunxi.org/


Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - murphy1969

1
Beginners / Android TV 2.3 (The most perfect firmware)
February 12, 2014, 07:37:09 am
Is there something I am doing wrong ? I have insalled this image and see no XBMc any way ? Anyone else having this problem ?

http://docs.cubieboard.org/tutorials/cb1/installation/cubieboard_android-4.0.x_release
2
Beginners / Re: A10 XBMC - Any pre built images
February 11, 2014, 03:13:44 pm
Thanks.
3
Beginners / Re: A10 XBMC - Any pre built images
February 11, 2014, 02:36:36 pm
Thanks will try i out today. Is this for SD or Nand installation ? also is it a server (run from command) or a desktop version.
4
Beginners / Re: A10 XBMC - Any pre built images
February 11, 2014, 02:27:03 pm
Thanks will try it out. Any android based images ?
5
Beginners / Re: A10 XBMC - Any pre built images
February 11, 2014, 02:03:08 pm
6
Beginners / A10 XBMC - Any pre built images
February 11, 2014, 09:55:30 am
Are there any pre built images for XBMC on A10. Android or linux.
7
Beginners / Backup from nand to sd
November 23, 2013, 09:40:09 pm
How do i backup from nand to sd. and use sd instead of nand.
8
Beginners / Re: Dahdi - missisng headers Help.
November 19, 2013, 05:43:51 pm
Quote from: patwood on November 18, 2013, 10:01:19 pm
Don't use fdisk on the nand.  It is partitioned with a custom allwinner format.  Use nand-part to display the partition layout or change it.


Thank you
9
Beginners / Re: Dahdi - missisng headers Help.
November 17, 2013, 09:57:11 pm
I just joined the asterisk forums also and got some good suggestions like not to use dahdi and libpri. Just compile asterisk and use it. I have got asterisk compiled on my cubieboard A10 now. I use the sd card for complet setup and then transferred the image to nand. now one question is when i run fdisk -l i get this error at the bottom. How do i fix it.

Disk /dev/nandb doesn't contain a valid partition table


Disk /dev/nand: 4085 MB, 4085252096 bytes
255 heads, 63 sectors/track, 496 cylinders, total 7979008 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/nand doesn't contain a valid partition table
You must set cylinders.
You can do this from the extra functions menu.

Disk /dev/nanda: 1 MB, 1048576 bytes
255 heads, 63 sectors/track, 0 cylinders, total 2048 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

     Device Boot      Start         End      Blocks   Id  System

Disk /dev/nandb: 4084 MB, 4084195328 bytes
255 heads, 63 sectors/track, 496 cylinders, total 7976944 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/nandb doesn't contain a valid partition table
root@Cubian:~# free -h
             total       used       free     shared    buffers     cached
Mem:          808M        45M       763M         0B       7.5M        20M
-/+ buffers/cache:        17M       790M
Swap:           0B         0B         0B
10
Beginners / XBMC image for A10 - Any recommendations
November 15, 2013, 03:57:33 pm
ANY recommendations of a good working XBMC image to try.
11
Beginners / Re: Dahdi - missisng headers Help.
November 14, 2013, 07:31:09 pm
I am able to compile but dahdi keeps giving me missing headers. I am going to try what you posted and let you all know the results. Here are the details after compiling ncurses, zlib and libnewt.

root@server1:/usr/src/dahdi-linux-complete-2.7.0.1+2.7.0.1# make all
make -C linux all
make[1]: Entering directory `/usr/src/dahdi-linux-complete-2.7.0.1+2.7.0.1/linux'
make -C drivers/dahdi/firmware firmware-loaders
make[2]: Entering directory `/usr/src/dahdi-linux-complete-2.7.0.1+2.7.0.1/linux/drivers/dahdi/firmware'
make[2]: Leaving directory `/usr/src/dahdi-linux-complete-2.7.0.1+2.7.0.1/linux/drivers/dahdi/firmware'
You do not appear to have the sources for the 3.4.67+ kernel installed.
make[1]: *** [oct612x-lib] Error 1
make[1]: Leaving directory `/usr/src/dahdi-linux-complete-2.7.0.1+2.7.0.1/linux'
make: *** [all] Error 2

13
Beginners / Re: Dahdi - missisng headers Help.
November 11, 2013, 06:44:02 pm
Is there any solution for Dahdi to compile from source. apt-get install dahdi install but apt-get install libpri does not.
14
Beginners / Dahdi - missisng headers Help.
November 10, 2013, 09:12:56 pm
Anyone know how to fix this issue os missing headers. The problem is when i compile from source I get missing headers but if I use aptt-get install dahdi it installs. The the problem comes at apt-get install libpri. Help please.
15
Thanks a lot but did not work. I would leave this topic and come back to it later. Right now I am going to try and figure out how to install asterisk. Going to start a new thread for that.