CubieBoard Forum

Cubieboard itself => General Discussion => Topic started by: doublemm on September 21, 2017, 04:08:55 pm

Title: cubieboard A10 Linux-sunxi 3.4.104
Post by: doublemm on September 21, 2017, 04:08:55 pm
Hello,

I have a problem with linux 3.4 kernel. When the kernel is booting, then this error message is coming:

U-Boot SPL 2017.09-rc2-00228-g8b3cec7 (Sep 11 2017 - 14:25:37)
DRAM: 1024 MiB
Failed to set core voltage! Can't set CPU frequency
Trying to boot from FEL


U-Boot 2017.09-rc2-00228-g8b3cec7 (Sep 11 2017 - 14:25:37 -0700) Allwinner Technology

CPU:   Allwinner A10 (SUN4I)
Model: Cubietech Cubieboard
I2C:   ready
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 0
MMC: no card present
mmc_init: -123, time 1
*** Warning - MMC init failed, using default environment

In:    serial
Out:   serial
Err:   serial
SCSI:  SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net:   No ethernet found.
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
USB2:   USB EHCI 1.00
USB3:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
=> bootm
## Booting kernel from Legacy Image at 42000000 ...
   Image Name:   Linux-3.4.104-00136-gd47d367
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4348376 Bytes = 4.1 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK

Starting kernel ...

<6>Booting Linux on physical CPU 0
<6>Initializing cgroup subsys cpuset
<5>Linux version 3.4.104-00136-gd47d367 (markus@ubuntu) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #14 PREEMPT Thu Sep 21 12:38:00 PDT 2017
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun4i
<6>Memory Reserved:
<6>     SYS  : 0x43000000 - 0x4300ffff  (  64 kB)
<6>     G2D  : 0x50000000 - 0x50ffffff  (  16 MB)
<6>     LCD  : 0x51000000 - 0x52ffffff  (  32 MB)
<6>cma: CMA: reserved 192 MiB at 43c00000
Memory policy: ECC disabled, Data cache writeback
<6>sunxi: Allwinner A10 revision C (AW1623/sun4i) detected.
<7>On node 0 totalpages: 114688
<7>free_area_init_node: node 0, pgdat c0839658, node_mem_map d3000000
<7>  DMA zone: 512 pages used for memmap
<7>  DMA zone: 0 pages reserved
<7>  DMA zone: 65024 pages, LIFO batch:15
<7>  Normal zone: 384 pages used for memmap
<7>  Normal zone: 48768 pages, LIFO batch:15
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768<c>
<7>pcpu-alloc: <c>