Recent Posts

Pages: [1] 2 3 ... 10
1
Off-Topic Discussion / Re: What are you listening to right now?
« Last post by tonnyken on March 18, 2019, 04:01:45 am »
Thanks for the information you share, it is very helpful for me
 candy crush soda
2
General Discussion / Re: Cubietruck Plus: Compile mainline kernel
« Last post by tonnyken on March 18, 2019, 03:57:54 am »
I also have the same situation as you but can't solve it, some of you know more than just me
run 3
3
Gaming / Re: Any support for 3D gaming
« Last post by rgmhtt on March 07, 2019, 12:35:01 pm »
The challenge is that there is no open MALI GPU code.  general GTK3 is a dog on cubieboards unless you have a Cubietech OS.  GTK2 is not so bad, but everything is moving off it to GTK3.

If Cubietech would provide the necessary pieces to the open development, things might be different.

For me, they are good servers.
4
Gaming / Re: Any support for 3D gaming
« Last post by clicker01 on March 07, 2019, 04:39:31 am »
Lawrence has the key to run some emulators...
\
Let me know the details
5
Introduce yourself / Re: New member Here
« Last post by rgmhtt on February 20, 2019, 05:42:21 am »
Welcome Jenny,

Tell us which Cubie you have, what distro you are working with, and the intended use of the system.

thanks!
6
Introduce yourself / Re: New member Here
« Last post by geometry01 on February 19, 2019, 11:06:35 pm »
Hello all Forum members, my name is Jenny. I am a game developer
7
Начинающим / Настройка сети Linaro 13.08
« Last post by DrWOLF on February 18, 2019, 10:00:12 am »
Такое дело, имеется железяка УТМ АТОЛ HUB19.
При детальном рассмотрении идентифицировал его как cubietruk на A20, с выпиленным SATA.
Развернул на это дело Linaro linux 13.08
И столкнулся с проблемой с сетью.
Железяка сеть не видит, хотя линк на сетевухе горит, по dhcp не получает ничего, прописал в
-----------------------------
/etc/network/interfaces :
auto eth0
ifcae eth0 inet static
addres 192.168.0.10
netmask 255.255.255.0
gateway 192.168.0.1
-----------------------------
Посмотрел на роутере - роутер успешно видит железяку с этим IP, провод выдергиваешь - железка пропадает.
но при этом не железяка не пингуется, ни с неё пинг не идет.
arp -a возвращает строку
? (192.168.0.1) at <incomplete> on eth0
Т.е. кубик тоже знает где роутер, но почему то не получает от него arp.

Подскажите куда копать пожалуйста?
P.S.: Если топик оформлен не правильно - готов к критике.
8
General Discussion / Re: Cubietruck Plus: Compile mainline kernel
« Last post by rgmhtt on February 16, 2019, 11:16:15 pm »
Odroid is a competitor to Cubieboards, so I avoid talking about it here.  Much.  But I like the design/features of the HC1, the only Odroid I have worked with.  I look at the HC1 to be an excellent platform for my next mailserver.  You can see about all my ARM SOC works at:

http://www.htt-consult.com/arm.html

There are links to installing CentOS7 on Cubies (2 and Truck) and a Odroid HC1 (needs the 4.19 kernel).

Also link to my work-in-progress on a replacement mailserver.  My current server is a Cubietruck running Redsleeve6 plus the standard fare of Postfix/Postfixadmin/Myaql/Dovecot/Amavis-new/Clamav/Spamassisin/Rouncubemail.  Amavis-new is a real load on a Cubietruck.  Need more processors.  But this box has been running since 5/14 (really needs the upgrade).

So I went shopping for 4 core or more with good sata, and decided on the HC1.

My replacement Samba DC (Nethsever) will be a CubieTruck.

My DNS and web servers are Cubieboard2s.

That about covers it.

Oh with the mailserver, I have to get the newer password hash (MD5 -> SHA512) and quota system along with a backup solution solved before I launch.  Probably a few weeks (got a trip to Beijing coming up getting in the way of stuff like this).

9
General Discussion / Re: Cubietruck Plus: Compile mainline kernel
« Last post by Deherrer on February 15, 2019, 11:04:16 am »
What exactly are you trying to do with Odroid HC1, rgmhtt? Is there a dedicated thread about your experiences with that?
10
Images updated to kernel 4.19.y
https://www.armbian.com/cubietruck/
Pages: [1] 2 3 ... 10