Recent Posts

Pages: [1] 2 3 ... 10
1
i tested module FC109 with cubieboard but it doesn't work more info in below link

http://blog.stackprogramer.xyz/en/2017/05/17/input-microphone-in-cubieboard/
2
Good point! Thanks for post this here.

I guess they disabled these other repository thinking in keep the system light even after you update it.
3
CubieBoard v5 OS (H8 Based) / Re: CB+ in operation
« Last post by franzbischoff on May 24, 2017, 08:59:34 pm »
Nice heatsink :D


[just a statement, this anti-spam questionnaire is annoying! :-D]
4
CubieBoard v5 OS (H8 Based) / Re: Install any(?) OS?
« Last post by franzbischoff on May 24, 2017, 08:57:24 pm »
The architecture of Cubieboard is ARM. You can theorically install any SO for ARM.

Will all features work? That's why there are some "official" distros for board like Raspberry. They try to address the board features. But in general you can get a linux server running with no problem.

Cheers
5
CubieBoard v5 OS (H8 Based) / How can I enable OpenGL on Linaro Desktop?
« Last post by franzbischoff on May 24, 2017, 08:52:25 pm »
I would like to use XBMC, or even see WebGL content, but seems default Linaro Desktop doesn't support OpenGL...

any fix?

Thanks
6
CubieBoard v5 OS (H8 Based) / Does CB5 support 4K output?
« Last post by franzbischoff on May 24, 2017, 08:49:56 pm »
I get the default and unique resolution of 1080p on Linaro Desktop.

There is any way to use 4K?

Thanks
7
Raspberry Pi / Re: Virtual machine for Raspberry Pi
« Last post by yeti on May 22, 2017, 01:45:09 pm »
Do you work for ExaGear?
8
Raspberry Pi / Virtual machine for Raspberry Pi
« Last post by pUnK on May 22, 2017, 11:37:20 am »
There is a number of virtual machines to use on Raspberry Pi devices. One of them is ExaGear, which is said to be quite stable and fast. Here is the setting up instructions, if you would like to test it: Virtual machine for Raspberry Pi
9
General Discussion / Jtag detection on CC-A80 (ver 1.2) board using D-stream
« Last post by shravan on May 22, 2017, 06:49:04 am »
Hi All,
I am working on cubieboard4(CC-A80, ver 1.2),I want to detect coresight tropology using  'D-Stream '.
According  to schematics on J20 connector 21,22,23, and 24 are jtag pins, took these pins out and connected to  D-stream Jtag .

I am trying to auto detect core sight tropology by using DS-5 IDE through “Platfrom Configuration” but hadn't got any luck on core sight tropolgy detection.

We have Jtag selection 0 and 1 (JTAGSEL0 and JTAGSEL1)from HW Schematic , what is the valid state to enter in Jtag mode.

Need  inputs for Jtag selection mode on cubie CC-A80(ver 1.2) board.

Regards,
-Shravan
10
Начинающим / Re: Как пересобрать ядро CB1?
« Last post by Hve on May 21, 2017, 08:03:16 am »
Предпочитаю нативную компиляцию - на самом устройстве, системный компилятор для сборки ядра не использую, скачал исходники "Linaro GCC", скомпилил на самих девайсах, а затем уже полученным GCC собираю\пересобираю ядра.
Конфигурирование и компиляцию GCC Linaro 4.6.4 (на данный момент) из исходников на самом кубике под Gentoo можете подробно расписать? Задача не тривиальная. Особенно для новичков. Хоть документация и в комплекте, но при переводе много нюансов (да и вообще подводных камней) может потеряться. Лучше в отдельной теме это организовать
Pages: [1] 2 3 ... 10