December 05, 2019, 09:56:10 am

News:

Have you visited the Allwinner Chipset wiki? - http://linux-sunxi.org/


Cubie_config

Started by MaQ, September 14, 2013, 06:55:30 am

Previous topic - Next topic

MaQ

Hallo base on cubieez(drkbcn) modification of rpi_config and https://github.com/mmplayer/nandinstall script I have create cubie_config with easy nand install option.
You can get it from:
https://github.com/maq99/nandinstall
should work for any sd image uImage nad script.bin is get from /boot dir
A10

drkbcn

Quote from: MaQ on September 14, 2013, 06:55:30 am
Hallo base on cubieez(drkbcn) modification of rpi_config and https://github.com/mmplayer/nandinstall script I have create cubie_config with easy nand install option.
You can get it from:
https://github.com/maq99/nandinstall
should work for any sd image uImage nad script.bin is get from /boot dir


Nice work! I'll put it on next Cubieez version  ;D
Blog sobre Raspberry Pi, Cubieboard y Linux
http://belinuxmyfriend.blogspot.com

darth_llamah

What are dependencies for nandinstall script?
I always get the same error on each distro I've tried nandinstall (Cubieez, *buntu, Romanrm's headless debian server):
Reading new partition table..
tar: option requires an argument -- 'f'
Try `tar --help' or `tar --usage' for more information.
0+0 records in
0+0 records out
0 bytes (0 B) copied, 0.0266765 s, 0.0 kB/s
Reading new partition table..

When I invoke tar manually using full paths it seems to work fine- partitions are altered and I can proceed with copying files. However cubieboard still doesn't boot from nand- only power led is lit, no network activity, mouse and keyboard are not activated (Saitek Eclipse has backlight).
Any hints?

cubieplayer

Quote from: MaQ on September 14, 2013, 06:55:30 am
Hallo base on cubieez(drkbcn) modification of rpi_config and https://github.com/mmplayer/nandinstall script I have create cubie_config with easy nand install option.
You can get it from:
https://github.com/maq99/nandinstall
should work for any sd image uImage nad script.bin is get from /boot dir

I use your script as cubian's configuration tool on start up