Author Topic: Cubieez, Debian 7.5 ARMHF A20 version (3.4.79 + MALI + G2D)  (Read 245908 times)

nextone

  • Guest
Re: Cubieez, Debian 7.1 ARMHF A20 version (tested)
« Reply #30 on: July 25, 2013, 06:37:44 am »
At first, I have to say thank you for the image. It is amazingly fast!

Not my stupid problem: I installed the image, change the IP address in /etc/network/interfaces and add the following nameservers to /etc/resolv.conf:

nameserver 8.8.8.8
nameserver 8.8.4.4


After, I reboot the Cubieboard and put in the ethernet cable. I can connect to the Cubieboard via internal network, but the DNS resolving fails. For example:

cubie@cubieez:~$ wget google.com
--2013-07-20 15:16:34--  http://google.com/
Resolving google.com (google.com)... failed: Name or service not known.
wget: unable to resolve host address `google.com'


Have any one a idea why it fails?

Jan

Technokrat78

  • Guest
Re: Cubieez, Debian 7.1 ARMHF A20 version (tested)
« Reply #31 on: July 25, 2013, 07:18:50 am »
Can you tell meplease from where did you take the kernel for this version in order to recompile it?

Thanks,
Andrei

Hi,

here is the next challenge...
I am trying to mount a network share from my Windows Homeserver via cifs, it doesnt work, because there is an error:
Quote
mount error: cifs filesystem not supported by the system
mount error(19): No such device

It seems that the kernel doesnt support the cifs filesystem.
Any solutions ?

Recompile the Kernel :P I could upload my .config as I've done with A10 version.

Lets try  8)
I meant, can you upload your .config file ?
I'll recompile the kernel with cifs support.
I'll take this howto http://www.cubieforums.com/index.php/topic,472.0.html + drkbcn .config (as soon he's distribute the .config  ;) ) + a little bit of brain 2.0  ;D and play "try & error".

amanz

  • Guest
Re: Cubieez, Debian 7.1 ARMHF A20 version (tested)
« Reply #32 on: July 25, 2013, 09:40:45 am »
Can you traceroute to 8.8.8.8?
If not, maybe your internet connection is not OK.
I am using my router's local IP as nameserver (192.168.1.1).

Andrei

At first, I have to say thank you for the image. It is amazingly fast!

Not my stupid problem: I installed the image, change the IP address in /etc/network/interfaces and add the following nameservers to /etc/resolv.conf:

nameserver 8.8.8.8
nameserver 8.8.4.4


After, I reboot the Cubieboard and put in the ethernet cable. I can connect to the Cubieboard via internal network, but the DNS resolving fails. For example:

cubie@cubieez:~$ wget google.com
--2013-07-20 15:16:34--  http://google.com/
Resolving google.com (google.com)... failed: Name or service not known.
wget: unable to resolve host address `google.com'


Have any one a idea why it fails?

Jan

Offline drkbcn

  • Full Member
  • ***
  • Posts: 101
  • Karma: +16/-1
    • View Profile
    • Cubieboard, Raspberry Pi & Linux
Re: Cubieez, Debian 7.1 ARMHF A20 version (tested)
« Reply #33 on: July 25, 2013, 11:17:21 am »
My .config file for your own Kernel compilation :) (3.3.0 branch)
Blog sobre Raspberry Pi, Cubieboard y Linux
http://belinuxmyfriend.blogspot.com

nmartinho

  • Guest
Re: Cubieez, Debian 7.1 ARMHF A20 version (tested)
« Reply #34 on: July 25, 2013, 01:25:07 pm »
This image is an excelent work.

However i'm unable to put OpenVPN to work, since the kernel has no TUN module available (tun.ko).
How can i fix this?

Thanks.

amanz

  • Guest
Re: Cubieez, Debian 7.1 ARMHF A20 version (tested)
« Reply #35 on: July 25, 2013, 01:53:05 pm »
Can you please write me the git repo for this kernel version?

Thanks

My .config file for your own Kernel compilation :) (3.3.0 branch)

Offline drkbcn

  • Full Member
  • ***
  • Posts: 101
  • Karma: +16/-1
    • View Profile
    • Cubieboard, Raspberry Pi & Linux
Re: Cubieez, Debian 7.1 ARMHF A20 version (tested)
« Reply #36 on: July 25, 2013, 01:58:41 pm »
Can you please write me the git repo for this kernel version?

Thanks

My .config file for your own Kernel compilation :) (3.3.0 branch)

Patwood's one. Documentation here:

http://www.cubieforums.com/index.php/topic,472.0.html
Blog sobre Raspberry Pi, Cubieboard y Linux
http://belinuxmyfriend.blogspot.com

Offline drkbcn

  • Full Member
  • ***
  • Posts: 101
  • Karma: +16/-1
    • View Profile
    • Cubieboard, Raspberry Pi & Linux
Re: Cubieez, Debian 7.1 ARMHF A20 version (tested)
« Reply #37 on: July 25, 2013, 02:01:55 pm »
This image is an excelent work.

However i'm unable to put OpenVPN to work, since the kernel has no TUN module available (tun.ko).
How can i fix this?

Thanks.

Thanks! ;) Download my .config and use the above link to clone patwood's git. TUN is under Network options.
Blog sobre Raspberry Pi, Cubieboard y Linux
http://belinuxmyfriend.blogspot.com

Technokrat78

  • Guest
Re: Cubieez, Debian 7.1 ARMHF A20 version (tested)
« Reply #38 on: July 25, 2013, 02:49:27 pm »
My .config file for your own Kernel compilation :) (3.3.0 branch)

Thanks.
I have to agree, good work  :)

nextone

  • Guest
Re: Cubieez, Debian 7.1 ARMHF A20 version (tested)
« Reply #39 on: July 25, 2013, 03:23:40 pm »
Can you traceroute to 8.8.8.8?
If not, maybe your internet connection is not OK.
I am using my router's local IP as nameserver (192.168.1.1).

Andrei

At first, I have to say thank you for the image. It is amazingly fast!

Not my stupid problem: I installed the image, change the IP address in /etc/network/interfaces and add the following nameservers to /etc/resolv.conf:

nameserver 8.8.8.8
nameserver 8.8.4.4


After, I reboot the Cubieboard and put in the ethernet cable. I can connect to the Cubieboard via internal network, but the DNS resolving fails. For example:

cubie@cubieez:~$ wget google.com
--2013-07-20 15:16:34--  http://google.com/
Resolving google.com (google.com)... failed: Name or service not known.
wget: unable to resolve host address `google.com'


Have any one a idea why it fails?

Jan

After reinstall it works. Do not know why, because of I did the same.

Technokrat78

  • Guest
Re: Cubieez, Debian 7.1 ARMHF A20 version (tested)
« Reply #40 on: July 25, 2013, 04:23:55 pm »
@drkbcn:
thanks for the .config, cifs is working now  :)

Offline drkbcn

  • Full Member
  • ***
  • Posts: 101
  • Karma: +16/-1
    • View Profile
    • Cubieboard, Raspberry Pi & Linux
Re: Cubieez, Debian 7.1 ARMHF A20 version (tested)
« Reply #41 on: July 25, 2013, 06:42:57 pm »
@drkbcn:
thanks for the .config, cifs is working now  :)

Enjoy with Cubieez ;D
Blog sobre Raspberry Pi, Cubieboard y Linux
http://belinuxmyfriend.blogspot.com

amanz

  • Guest
Re: Cubieez, Debian 7.1 ARMHF A20 version (tested)
« Reply #42 on: July 26, 2013, 02:18:35 am »
I've managed to recompile now using your .config and provided pathwood's repo.
Everything is working now and the image is VERY fast!

Thank you very much drkbcn!

Andrei

amanz

  • Guest
Re: Cubieez, Debian 7.1 ARMHF A20 version (tested)
« Reply #43 on: July 26, 2013, 02:28:27 am »
Thank you very for the information!
Everything works now!

Can you tell meplease from where did you take the kernel for this version in order to recompile it?

Thanks,
Andrei

Hi,

here is the next challenge...
I am trying to mount a network share from my Windows Homeserver via cifs, it doesnt work, because there is an error:
Quote
mount error: cifs filesystem not supported by the system
mount error(19): No such device

It seems that the kernel doesnt support the cifs filesystem.
Any solutions ?

Recompile the Kernel :P I could upload my .config as I've done with A10 version.

Lets try  8)
I meant, can you upload your .config file ?
I'll recompile the kernel with cifs support.
I'll take this howto http://www.cubieforums.com/index.php/topic,472.0.html + drkbcn .config (as soon he's distribute the .config  ;) ) + a little bit of brain 2.0  ;D and play "try & error".

Billa

  • Guest
Re: Cubieez, Debian 7.1 ARMHF A20 version (tested)
« Reply #44 on: July 26, 2013, 06:36:46 pm »
I know I ain't no Linux guru, but when you say to edit the script.bin file to change the monitor resolution and then putting it on the table do you mean writting it on that file like:

screen0_output_type=3 (I run the Cubie2 with HDMI)
screen_output_mode=5

Is this correct?

Apparently it ain't because upon rebooting I get no display at all.

PS: Can't find a fex editor for Windows no matter where I search, any help over here?
« Last Edit: July 26, 2013, 06:57:13 pm by Billa »