April 09, 2020, 02:58:57 pm


Have you visited the Allwinner Chipset wiki? - http://linux-sunxi.org/

pcDuino4 Nano

Started by wenhui, September 21, 2016, 07:57:27 am

Previous topic - Next topic


The pcDuino4 Nano is an Allwinner H3 based ARM board. It is only two thirds the size of the Raspberry Pi. It is open source. It works with Ubuntu MATE, Debian and etc. The pcDuino4 Nano uses the Allwinner H3 Soc. It integrates Ethernet, IR receiver, video/audio output and supports HDMI and AVOUT. It can be powered via the MicroUSB port In such a small board it still integrates rich interfaces and ports. Besides the popular HDMI, Ethernet, USB-Host, USB-OTG, DVP camera interface and AVOUT (audio and video) it has an onboard Microphone, IR receiver, a serial debug port and a Raspberry Pi compatible 40 pin GPIO pin header.


SoC - Allwinner H3 quad core Cortex A7 @ 1.2 GHz with an ARM Mali-400MP2 GPU up to 600 MHz
System Memory - 1GB DDR3 SDRAM
Storage - micro SD card slot
Video & Audio Output - HDMI and 3.5mm jack for CVBS (composite + stereo audio)
Connectivity -10/100M Ethernet
USB - 3x USB 2.0 host ports, 1x micro USB OTG port
Camera - DVP Interface
Expansions - 40-pin Raspberry Pi compatible header with UART, SPI, I2C, PWM, GPIOs, etc...
Debugging - 4-pin header for serial console
Misc - Power and reset buttons; 2x LEDs; IR receiver; on-board microphone.
Power Supply - 5V/2A via micro USB port; 4.7V ~ 5.6V via VDD pin on "Raspberry Pi" header.
Dimensions - 64 x 50mm (Orange Pi One dimensions: 69mm × 48mm)