Author Topic: Не грузится Cubieboard2 при вставленной карте памяти  (Read 2133 times)

Offline __bl__

  • Newbie
  • *
  • Posts: 13
  • Karma: +0/-0
    • View Profile
Проблема следующая: Не грузится Cubieboard2 при вставленной карте памяти, т.е. при загрузке выключается питание платы и гаснет красный светодиод.
Это происходит на следующей строчке загрузки ядра:
"axp20_ldo2: incomplete constraints"

Offline ua3prq

  • Moderator
  • Hero Member
  • *****
  • Posts: 660
  • Karma: +14/-1
    • View Profile
Вывод с Uart покажите.

Offline __bl__

  • Newbie
  • *
  • Posts: 13
  • Karma: +0/-0
    • View Profile
После изъятия и установки флешки, система загружается как положено. Не могу повторно воспроизвести проблему. Как только появиться снова отпишусь. А пока спасибо за помощь.
« Last Edit: March 23, 2016, 03:40:54 pm by __bl__ »

Offline __bl__

  • Newbie
  • *
  • Posts: 13
  • Karma: +0/-0
    • View Profile
После продолжительных исследований установил следующее, оказывается зависание (точнее отключение питания) не зависит от карты. Попробовал 2 разных карты. Скачал с сайта armbian.com два образа с разными ядрами. Ядро версии 4.6.2 грузится в любом случае, а 3.4.112 виснет (отключается питание, т.е. гаснет красный светодиод) после перезагрузки. Вот лог с UART:
Code: [Select]
U-Boot SPL 2016.05-armbian (Jun 21 2016 - 16:23:15)
DRAM: 1024 MiB
CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from MMC1


U-Boot 2016.05-armbian (Jun 21 2016 - 16:23:15 +0200) Allwinner Technology

CPU:   Allwinner A20 (SUN7I)
Model: Cubietech Cubieboard2
I2C:   ready
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
SCSI:  SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net:   eth0: ethernet@01c50000
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
USB2:   USB EHCI 1.00
USB3:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
Hit any key to stop autoboot:  2  1  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
2350 bytes read in 181 ms (11.7 KiB/s)
## Executing script at 43100000
0 bytes read in 131 ms (0 Bytes/s)
** File not found /boot/.next **
** Unrecognized filesystem type **
** File not found .next **
46308 bytes read in 344 ms (130.9 KiB/s)
3644206 bytes read in 384 ms (9.1 MiB/s)
5606240 bytes read in 547 ms (9.8 MiB/s)
Kernel image @ 0x48000000 [ 0x000000 - 0x558b60 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
   Image Name:   uInitrd
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    3644142 Bytes = 3.5 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

<6>Booting Linux on physical CPU 0

<6>Initializing cgroup subsys cpuset

<6>Initializing cgroup subsys cpu

<5>Linux version 3.4.112-sun7i (root@pluton) (gcc version 5.3.1 20160413 (Ubuntu/Linaro 5.3.1-14ubuntu2) ) #7 SMP PREEMPT Tue Jun 21 15:43:57 CEST 2016

CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d

CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

Machine: sun7i

<6>Memory Reserved:

<6> SYS  : 0x43000000 - 0x4300ffff  (  64 kB)

<6> VE   : 0x44000000 - 0x48ffffff  (  80 MB)

<6> G2D  : 0x49000000 - 0x49ffffff  (  16 MB)

<6> LCD  : 0x4a000000 - 0x4bffffff  (  32 MB)

Memory policy: ECC disabled, Data cache writealloc

<6>sunxi: Allwinner A20 (AW1651/sun7i) detected.

<7>On node 0 totalpages: 262144

<7>free_area_init_node: node 0, pgdat c0a89440, node_mem_map d0000000

<7>  DMA zone: 512 pages used for memmap

<7>  DMA zone: 0 pages reserved

<7>  DMA zone: 65024 pages, LIFO batch:15

<7>  Normal zone: 1008 pages used for memmap

<7>  Normal zone: 128016 pages, LIFO batch:31

<7>  HighMem zone: 528 pages used for memmap

<7>  HighMem zone: 67056 pages, LIFO batch:15

<6>PERCPU: Embedded 8 pages/cpu @d0808000 s8256 r8192 d16320 u32768

<7>pcpu-alloc: s8256 r8192 d16320 u32768 alloc=8*4096<c>

<7>pcpu-alloc: <c>[0] <c>0 <c>[0] <c>1 <c>

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096

<5>Kernel command line: console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait rootfstype=ext4 cgroup_enable=memory swapaccount=1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=7

<6>PID hash table entries: 4096 (order: 2, 16384 bytes)

<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

<6>allocated 2097152 bytes of page_cgroup

<6>please try 'cgroup_disable=memory' option if you don't want memory cgroups

<6>Memory: 1024MB = 1024MB total

<5>Memory: 890044k/890044k available, 158532k reserved, 270336K highmem

<5>Virtual kernel memory layout:

    vector  : 0xffff0000 - 0xffff1000   (   4 kB)

    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)

    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)

    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

    modules : 0xbf000000 - 0xbfe00000   (  14 MB)

      .text : 0xc0008000 - 0xc09dfe98   (10080 kB)

      .init : 0xc09e0000 - 0xc0a18040   ( 225 kB)

      .data : 0xc0a1a000 - 0xc0a91d68   ( 480 kB)

       .bss : 0xc0a91d8c - 0xc0c66f78   (1877 kB)

<6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

<6>Preemptible hierarchical RCU implementation.

<6> RCU dyntick-idle grace-period acceleration is enabled.

<6> Additional per-CPU info printed with stalls.

<6>NR_IRQS:192

<6>Architected local timer running at 24.00MHz.

<6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms

<2>start_kernel(): bug: interrupts were enabled early

<6>Console: colour dummy device 80x30

<6>console [tty1] enabled

<6>Calibrating delay loop... <c>1816.98 BogoMIPS (lpj=9084928)

<6>pid_max: default: 32768 minimum: 301

<6>Mount-cache hash table entries: 512

<6>Initializing cgroup subsys cpuacct

<6>Initializing cgroup subsys memory

<6>Initializing cgroup subsys devices

<6>Initializing cgroup subsys freezer

<6>Initializing cgroup subsys blkio

<6>Initializing cgroup subsys perf_event

<6>CPU: Testing write buffer coherency: ok

<6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

<6>hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available

<6>Setting up static identity map for 0x40724a18 - 0x40724a70

CPU1: Booted secondary processor

<6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

<6>Brought up 2 CPUs

<6>SMP: Total of 2 processors activated (3640.52 BogoMIPS).

<6>devtmpfs: initialized

<6>dummy:

<6>NET: Registered protocol family 16

<6>DMA: preallocated 256 KiB pool for atomic coherent allocations

<6>hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

<6>hw-breakpoint: maximum watchpoint size is 8 bytes.

<6>[ccu-inf] aw clock manager init

<6>[ccu-inf] aw_ccu_init

<6>[ccu-inf] script config pll3 to 297MHz

<6>[ccu-inf] script config pll4 to 300MHz

<6>[ccu-inf] script config pll6 to 600MHz

<6>[ccu-inf] script config pll7 to 297MHz

<6>[ccu-inf] script config pll8 to 336MHz

<6>Init eGon pin module V2.0

<6>bio: create slab <bio-0> at 0

<6>sunxi_gpio driver init ver 1.3

<6>gpiochip_add: registered GPIOs 1 to 2 on device: A1X_GPIO

<5>SCSI subsystem initialized

<7>libata version 3.00 loaded.

<6>usbcore: registered new interface driver usbfs

<6>usbcore: registered new interface driver hub

<6>usbcore: registered new device driver usb

<6>Linux media interface: v0.10

<6>Linux video capture interface: v2.00

<6>Advanced Linux Sound Architecture Driver Version 1.0.25.

<6>Switching to clocksource arch_sys_counter

<5>FS-Cache: Loaded

<6>CacheFiles: Loaded

<6>cfg80211: Calling CRDA to update world regulatory domain

[usb_manager]: CONFIG_USB_SW_SUNXI_USB0_OTG

[sw_hcd0]: usb host driver initialize........

[sw_hcd0]: open_usb_clock

[sw_hcd0]: host_init_state = 1

[sw_hcd0]: platform is usb host

[sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)

[sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 70

<6>sw_hcd_host0 sw_hcd_host0: sw_hcd host driver

<6>sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1

<6>hub 1-0:1.0: USB hub found

<6>hub 1-0:1.0: 1 port detected

wrn: hcd is not enable, need not start hcd

[sw_hcd0]: sw_usb_host0_disable start

-------sw_hcd0_soft_disconnect---------

is_on = 0, hcd0_set_vbus_cnt = 0

[sw_hcd_host0]: Set USB Power Off

wrn: hcd is not enable, need not stop hcd

[sw_hcd0]: close_usb_clock

[sw_hcd0]: sw_usb_host0_disable end

[sw_udc]: udc_init: version 20080411

<6>NET: Registered protocol family 2

<6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

<6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

<6>TCP bind hash table entries: 65536 (order: 7, 786432 bytes)

<6>TCP: Hash tables configured (established 131072 bind 65536)

<6>TCP: reno registered

<6>UDP hash table entries: 512 (order: 2, 16384 bytes)

<6>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

<6>NET: Registered protocol family 1

<6>RPC: Registered named UNIX socket transport module.

<6>RPC: Registered udp transport module.

<6>RPC: Registered tcp transport module.

<6>RPC: Registered tcp NFSv4.1 backchannel transport module.

<6>Trying to unpack rootfs image as initramfs...

<6>Freeing initrd memory: 3556K

<6>audit: initializing netlink socket (disabled)

<5>type=2000 audit(0.860:1): initialized

highmem bounce pool size: 64 pages

<5>VFS: Disk quotas dquot_6.5.2

Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

<6>squashfs: version 4.0 (2009/01/31) Phillip Lougher

<5>NFS: Registering the id_resolver key type

<6>NTFS driver 2.1.30 [Flags: R/W].

<6>fuse init (API version 7.18)

<6>JFS: nTxBlock = 6981, nTxLock = 55850

<6>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled

<6>Btrfs loaded

<6>msgmni has been set to 1217

<6>alg: No test for stdrng (krng)

<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

<6>io scheduler noop registered

<6>io scheduler deadline registered

<6>io scheduler cfq registered (default)

<6>sunxi disp driver loaded (/dev/disp api 1.0)

<6>Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled

<6>[uart]: used uart info.: 0x01

<6>[uart]: serial probe 0 irq 33 mapbase 0x01c28000

<6>sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A

[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.112-sun7i (root@pluton) (gcc version 5.3.1 20160413 (Ubuntu/Linaro 5.3.1-14ubuntu2) ) #7 SMP PREEMPT Tue Jun 21 15:43:57 CEST 2016
[    0.000000] Memory Reserved:
[    0.000000] SYS  : 0x43000000 - 0x4300ffff  (  64 kB)
[    0.000000] VE   : 0x44000000 - 0x48ffffff  (  80 MB)
[    0.000000] G2D  : 0x49000000 - 0x49ffffff  (  16 MB)
[    0.000000] LCD  : 0x4a000000 - 0x4bffffff  (  32 MB)
[    0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected.
[    0.000000] PERCPU: Embedded 8 pages/cpu @d0808000 s8256 r8192 d16320 u32768
[    0.000000] Kernel command line: console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait rootfstype=ext4 cgroup_enable=memory swapaccount=1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] allocated 2097152 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 1024MB = 1024MB total
[    0.000000] Memory: 890044k/890044k available, 158532k reserved, 270336K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc09dfe98   (10080 kB)
[    0.000000]       .init : 0xc09e0000 - 0xc0a18040   ( 225 kB)
[    0.000000]       .data : 0xc0a1a000 - 0xc0a91d68   ( 480 kB)
[    0.000000]        .bss : 0xc0a91d8c - 0xc0c66f78   (1877 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] Additional per-CPU info printed with stalls.
[    0.000000] NR_IRQS:192
[    0.000000] Architected local timer running at 24.00MHz.
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] start_kernel(): bug: interrupts were enabled early
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty1] enabled
[    0.013671] Calibrating delay loop... 1816.98 BogoMIPS (lpj=9084928)
[    0.076015] pid_max: default: 32768 minimum: 301
[    0.079678] Mount-cache hash table entries: 512
[    0.083875] Initializing cgroup subsys cpuacct
[    0.087211] Initializing cgroup subsys memory
[    0.090643] Initializing cgroup subsys devices
[    0.094087] Initializing cgroup subsys freezer
[    0.097323] Initializing cgroup subsys blkio
[    0.101006] Initializing cgroup subsys perf_event
[    0.104595] CPU: Testing write buffer coherency: ok
[    0.109793] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.116911] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[    0.122462] Setting up static identity map for 0x40724a18 - 0x40724a70
[    0.297373] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.299376] Brought up 2 CPUs
[    0.304714] SMP: Total of 2 processors activated (3640.52 BogoMIPS).
[    0.307939] devtmpfs: initialized
[    0.313686] dummy:
[    0.317361] NET: Registered protocol family 16
[    0.323719] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.331530] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.336426] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.339592] [ccu-inf] aw clock manager init
[    0.341873] [ccu-inf] aw_ccu_init
[    0.345852] [ccu-inf] script config pll3 to 297MHz
[    0.349615] [ccu-inf] script config pll4 to 300MHz
[    0.353372] [ccu-inf] script config pll6 to 600MHz
[    0.357147] [ccu-inf] script config pll7 to 297MHz
[    0.360904] [ccu-inf] script config pll8 to 336MHz
[    0.363677] Init eGon pin module V2.0
[    0.373004] bio: create slab <bio-0> at 0
[    0.376585] sunxi_gpio driver init ver 1.3
[    0.382277] gpiochip_add: registered GPIOs 1 to 2 on device: A1X_GPIO
[    0.385423] SCSI subsystem initialized
[    0.392973] usbcore: registered new interface driver usbfs
[    0.397318] usbcore: registered new interface driver hub
[    0.401499] usbcore: registered new device driver usb
[    0.404658] Linux media interface: v0.10
[    0.408296] Linux video capture interface: v2.00
[    0.413927] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.419352] Switching to clocksource arch_sys_counter
[    0.421496] FS-Cache: Loaded
[    0.423711] CacheFiles: Loaded
[    0.433773] cfg80211: Calling CRDA to update world regulatory domain
[    0.499748] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
[    0.506484] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
[    0.509933] hub 1-0:1.0: USB hub found
[    0.512885] hub 1-0:1.0: 1 port detected
[    0.546942] NET: Registered protocol family 2
[    0.563554] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.570515] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.578083] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[    0.584819] TCP: Hash tables configured (established 131072 bind 65536)
[    0.587036] TCP: reno registered
[    0.591922] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.597284] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.600885] NET: Registered protocol family 1
[    0.606177] RPC: Registered named UNIX socket transport module.
[    0.609858] RPC: Registered udp transport module.
[    0.613549] RPC: Registered tcp transport module.
[    0.618950] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.623527] Trying to unpack rootfs image as initramfs...
[    0.868702] Freeing initrd memory: 3556K
[    0.874273] audit: initializing netlink socket (disabled)
[    0.878000] type=2000 audit(0.860:1): initialized
[    0.894290] VFS: Disk quotas dquot_6.5.2
[    0.907126] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.912693] NFS: Registering the id_resolver key type
[    0.917273] NTFS driver 2.1.30 [Flags: R/W].
[    0.920566] fuse init (API version 7.18)
[    0.925235] JFS: nTxBlock = 6981, nTxLock = 55850
[    0.941745] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[    0.945994] Btrfs loaded
[    0.948831] msgmni has been set to 1217
[    0.956292] alg: No test for stdrng (krng)
[    0.962983] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.965937] io scheduler noop registered
[    0.969174] io scheduler deadline registered
[    0.972878] io scheduler cfq registered (default)
[    0.977746] sunxi disp driver loaded (/dev/disp api 1.0)
[    0.983332] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.987975] [uart]: used uart info.: 0x01
[    0.992684] [uart]: serial probe 0 irq 33 mapbase 0x01c28000
[    1.018982] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
<6>console [ttyS0] enabled

[    1.687526] console [ttyS0] enabled
<7>G2D: drv_g2d_init

<6>G2D: g2dmem: g2d_start=49000000, g2d_size=1000000

[    1.698374] G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
<6>G2D: head:c9000000,tail:ca000000

[    1.707381] G2D: head:c9000000,tail:ca000000
<6>G2D: Module initialized.major:250

[    1.715002] G2D: Module initialized.major:250
<6>brd: module loaded

[    1.728459] brd: module loaded
<6>loop: module loaded

[    1.737481] loop: module loaded
[NAND] nand driver version: 0x2 0x9

<4>Dev Sunxi softw311 nand magic does not match for MBR 1: softw411

[    1.795142] Dev Sunxi softw311 nand magic does not match for MBR 1: softw411
<4>Dev Sunxi softw311 nand magic does not match for MBR 2:         

[    1.808270] Dev Sunxi softw311 nand magic does not match for MBR 2:         
<4>Dev Sunxi softw311 nand magic does not match for MBR 3:         

[    1.821337] Dev Sunxi softw311 nand magic does not match for MBR 3:         
<4>Dev Sunxi softw311 nand magic does not match for MBR 4:         

[    1.834415] Dev Sunxi softw311 nand magic does not match for MBR 4:         
<4>Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.

[    1.849212] Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.
<4>Dev Sunxi softw411 nand: part 1, start 32768, size 32768

[    1.867911] Dev Sunxi softw411 nand: part 1, start 32768, size 32768
<4>Dev Sunxi softw411 nand: part 2, start 65536, size 7913472

[    1.879802] Dev Sunxi softw411 nand: part 2, start 65536, size 7913472
<6> nand: nand1 nand2

[    1.888353]  nand: nand1 nand2
[NAND]nand driver, ok.

pwm-sunxi: pwm0 configured - period: 20, duty_percent: 50, duty: 10

<6>sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP

[    1.906982] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
<6>ahci: SSS flag set, parallel bus scan disabled

[    1.918465] ahci: SSS flag set, parallel bus scan disabled
<6>sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode

[    1.931379] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
<6>sw_ahci sw_ahci.0: flags: ncq sntf stag pm led clo only pio slum part ccc

[    1.946720] sw_ahci sw_ahci.0: flags: ncq sntf stag pm led clo only pio slum part ccc
<6>scsi0 : sw_ahci_platform

[    1.958041] scsi0 : sw_ahci_platform
<6>ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88

[    1.968891] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
<3>[spi-err] Get spi devices number failed

[    1.980886] [spi-err] Get spi devices number failed
<3>[spi-err] register spi devices board info failed

[    1.990495] [spi-err] register spi devices board info failed
<4>spi: cannot find any using configuration for                     all 4 spi controllers, return directly!

[    2.005711] spi: cannot find any using configuration for                     all 4 spi controllers, return directly!
<6>bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)

[    2.022331] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
<6>Fixed MDIO Bus: probed

[    2.034237] Fixed MDIO Bus: probed
<6>sunxi_emac Using mii phy on PortA

[    2.040968] sunxi_emac Using mii phy on PortA
<6>sunxi_emac Using MAC from SID: 02:ce:07:c1:82:b7[    2.060192] sunxi_emac Using MAC from SID: 02:ce:07:c1:82:b7<4>emac_init fetch emac using configuration failed


[    2.072117] emac_init fetch emac using configuration failed
<6>gmac driver is disabled

[    2.080361] gmac driver is disabled
<6>PPP generic driver version 2.4.2

[    2.087088] PPP generic driver version 2.4.2
<6>PPP BSD Compression module registered

[    2.095296] PPP BSD Compression module registered
<6>PPP Deflate Compression module registered

[    2.104034] PPP Deflate Compression module registered
<6>PPP MPPE Compression module registered

[    2.116177] PPP MPPE Compression module registered
<6>NET: Registered protocol family 24

[    2.124471] NET: Registered protocol family 24
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    2.135049] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    2.146820] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[sw-ehci1]: open clock

[sw-ehci1]: Set USB Power ON

<6>sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver

[    2.184580] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2

[    2.198325] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
<6>sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000

[    2.209790] sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
<6>sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00

[    2.233803] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
<6>hub 2-0:1.0: USB hub found

[    2.242583] hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 1 port detected

[    2.249230] hub 2-0:1.0: 1 port detected
[sw-ohci1]: open clock

<6>sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver

[    2.281947] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3

[    2.295328] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
<6>sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400

[    2.306697] sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
<6>ata1: SATA link down (SStatus 0 SControl 300)

[    2.323819] ata1: SATA link down (SStatus 0 SControl 300)
<6>hub 3-0:1.0: USB hub found

[    2.376814] hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected

[    2.383517] hub 3-0:1.0: 1 port detected
[sw-ehci2]: open clock

[sw-ehci2]: Set USB Power ON

<6>sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver

[    2.419176] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4

[    2.432914] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
<6>sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000

[    2.444360] sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
<6>sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00

[    2.473809] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
<6>hub 4-0:1.0: USB hub found

[    2.482613] hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 1 port detected

[    2.489256] hub 4-0:1.0: 1 port detected
[sw-ohci2]: open clock

<6>sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver

[    2.521989] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5

[    2.535371] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
<6>sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400

[    2.546745] sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
<6>hub 5-0:1.0: USB hub found

[    2.616796] hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 1 port detected

[    2.623474] hub 5-0:1.0: 1 port detected
<6>Initializing USB Mass Storage driver...

[    2.631634] Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage

[    2.641685] usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.

[    2.651285] USB Mass Storage support registered.
<6>usbcore: registered new interface driver ums-alauda

[    2.660849] usbcore: registered new interface driver ums-alauda
<6>usbcore: registered new interface driver ums-cypress

[    2.671790] usbcore: registered new interface driver ums-cypress
<6>usbcore: registered new interface driver ums-datafab

[    2.682813] usbcore: registered new interface driver ums-datafab
<6>usbcore: registered new interface driver ums_eneub6250

[    2.694007] usbcore: registered new interface driver ums_eneub6250
<6>usbcore: registered new interface driver ums-freecom

[    2.705199] usbcore: registered new interface driver ums-freecom
<6>usbcore: registered new interface driver ums-isd200

[    2.716131] usbcore: registered new interface driver ums-isd200
<6>usbcore: registered new interface driver ums-jumpshot

[    2.727220] usbcore: registered new interface driver ums-jumpshot
<6>usbcore: registered new interface driver ums-karma

[    2.738162] usbcore: registered new interface driver ums-karma
<6>usbcore: registered new interface driver ums-onetouch

[    2.749097] usbcore: registered new interface driver ums-onetouch
<6>usbcore: registered new interface driver ums-realtek

[    2.760238] usbcore: registered new interface driver ums-realtek
<6>usbcore: registered new interface driver ums-sddr09

[    2.771177] usbcore: registered new interface driver ums-sddr09
<6>usbcore: registered new interface driver ums-sddr55

[    2.782025] usbcore: registered new interface driver ums-sddr55
<6>usbcore: registered new interface driver ums-usbat

[    2.792783] usbcore: registered new interface driver ums-usbat
<6>mousedev: PS/2 mouse device common for all mice

[    2.803374] mousedev: PS/2 mouse device common for all mice
===========================hv_keypad_init=====================

========HV Inital ===================

<3>tkey_fetch_sysconfig_para: tkey_unused.

[    2.821974] tkey_fetch_sysconfig_para: tkey_unused.
hv_keypad_init: after fetch_sysconfig_para:  normal_i2c: 0x0. normal_i2c[1]: 0x0

<3>sunxi-rtc sunxi-rtc: Warning: RTC time is wrong!

[    2.839248] sunxi-rtc sunxi-rtc: Warning: RTC time is wrong!
<6>sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0

[    2.850236] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
<6>i2c /dev entries driver

[    2.858861] i2c /dev entries driver
config i2c gpio with gpio_config api

<6>axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected

[    2.871538] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
<6>axp_mfd 0-0034: AXP internal temperature monitoring enabled

[    2.882695] axp_mfd 0-0034: AXP internal temperature monitoring enabled
<4>i2c i2c-0: Invalid probe address 0x00

[    2.893981] i2c i2c-0: Invalid probe address 0x00
<6>I2C: i2c-0: AW16XX I2C adapter

[    2.901746] I2C: i2c-0: AW16XX I2C adapter
[cedar dev]: install start!!!

[cedar dev]: install end!!!

[tt]----- avs_dev driver load... ----

[tt]-----      register iomem      ----

[tt]--- avs_dev driver load ok!! -----

[ace_drv] start!!!

[ace_drv] init end!!!

[pa_drv] start!!!

[pa_drv] init end!!!

<6>axp20_ldo1: 1300 mV

[    2.932797] axp20_ldo1: 1300 mV
<6>axp20_ldo2: 1800 <--> 3300 mV at 3000 mV

[    2.941226] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV

P.S. В nand свой загрузчик. Если вытянуть карту памяти включить cubiebaord2 и вставить её обратно, то система грузиться.
« Last Edit: August 08, 2016, 09:19:57 am by __bl__ »

Offline __bl__

  • Newbie
  • *
  • Posts: 13
  • Karma: +0/-0
    • View Profile
Вот лог нормальной загрузки после перевтыкания SD карты:
Code: [Select]
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.08.08 18:10:15 =~=~=~=~=~=~=~=~=~=~=~=
dmesg
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.112-sun7i (root@pluton) (gcc version 5.3.1 20160413 (Ubuntu/Linaro 5.3.1-14ubuntu2) ) #18 SMP PREEMPT Tue Jul 5 16:21:22 CEST 2016
[    0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: sun7i
[    0.000000] Memory Reserved:
[    0.000000] SYS  : 0x43000000 - 0x4300ffff  (  64 kB)
[    0.000000] VE   : 0x44000000 - 0x48ffffff  (  80 MB)
[    0.000000] G2D  : 0x49000000 - 0x49ffffff  (  16 MB)
[    0.000000] LCD  : 0x4a000000 - 0x4bffffff  (  32 MB)
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected.
[    0.000000] On node 0 totalpages: 262144
[    0.000000] free_area_init_node: node 0, pgdat c0a89440, node_mem_map d0000000
[    0.000000]   DMA zone: 512 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 65024 pages, LIFO batch:15
[    0.000000]   Normal zone: 1008 pages used for memmap
[    0.000000]   Normal zone: 128016 pages, LIFO batch:31
[    0.000000]   HighMem zone: 528 pages used for memmap
[    0.000000]   HighMem zone: 67056 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 8 pages/cpu @d0808000 s8256 r8192 d16320 u32768
[    0.000000] pcpu-alloc: s8256 r8192 d16320 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
[    0.000000] Kernel command line: console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait rootfstype=ext4 cgroup_enable=memory swapaccount=1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=1
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] allocated 2097152 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 1024MB = 1024MB total
[    0.000000] Memory: 890036k/890036k available, 158540k reserved, 270336K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc09dfe90   (10080 kB)
[    0.000000]       .init : 0xc09e0000 - 0xc0a18040   ( 225 kB)
[    0.000000]       .data : 0xc0a1a000 - 0xc0a91d68   ( 480 kB)
[    0.000000]        .bss : 0xc0a91d8c - 0xc0c66f78   (1877 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] Additional per-CPU info printed with stalls.
[    0.000000] NR_IRQS:192
[    0.000000] Architected local timer running at 24.00MHz.
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] start_kernel(): bug: interrupts were enabled early
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty1] enabled
[    0.013296] Calibrating delay loop... 1816.98 BogoMIPS (lpj=9084928)
[    0.076005] pid_max: default: 32768 minimum: 301
[    0.079660] Mount-cache hash table entries: 512
[    0.083839] Initializing cgroup subsys cpuacct
[    0.087157] Initializing cgroup subsys memory
[    0.090580] Initializing cgroup subsys devices
[    0.094014] Initializing cgroup subsys freezer
[    0.097240] Initializing cgroup subsys blkio
[    0.100912] Initializing cgroup subsys perf_event
[    0.104491] CPU: Testing write buffer coherency: ok
[    0.109677] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.116782] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[    0.122317] Setting up static identity map for 0x40724a38 - 0x40724a90
[    0.238785] CPU1: Booted secondary processor
[    0.297218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.299222] Brought up 2 CPUs
[    0.304532] SMP: Total of 2 processors activated (3640.52 BogoMIPS).
[    0.307731] devtmpfs: initialized
[    0.313528] dummy:
[    0.317197] NET: Registered protocol family 16
[    0.323512] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.331306] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.336115] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.339268] [ccu-inf] aw clock manager init
[    0.341539] [ccu-inf] aw_ccu_init
[    0.345504] [ccu-inf] script config pll3 to 297MHz
[    0.349254] [ccu-inf] script config pll4 to 300MHz
[    0.353002] [ccu-inf] script config pll6 to 600MHz
[    0.356762] [ccu-inf] script config pll7 to 297MHz
[    0.360509] [ccu-inf] script config pll8 to 336MHz
[    0.363267] Init eGon pin module V2.0
[    0.372697] bio: create slab <bio-0> at 0
[    0.376256] sunxi_gpio driver init ver 1.3
[    0.381897] gpiochip_add: registered GPIOs 1 to 2 on device: A1X_GPIO
[    0.385050] SCSI subsystem initialized
[    0.387902] libata version 3.00 loaded.
[    0.392586] usbcore: registered new interface driver usbfs
[    0.396920] usbcore: registered new interface driver hub
[    0.401070] usbcore: registered new device driver usb
[    0.404209] Linux media interface: v0.10
[    0.407835] Linux video capture interface: v2.00
[    0.413427] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.418815] Switching to clocksource arch_sys_counter
[    0.420894] FS-Cache: Loaded
[    0.423090] CacheFiles: Loaded
[    0.434205] cfg80211: Calling CRDA to update world regulatory domain
[    0.435525] [usb_manager]: CONFIG_USB_SW_SUNXI_USB0_OTG
[    0.439308] [sw_hcd0]: usb host driver initialize........
[    0.443533] [sw_hcd0]: open_usb_clock
[    0.467784] [sw_hcd0]: host_init_state = 1
[    0.468754] [sw_hcd0]: platform is usb host
[    0.471674] [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
[    0.482858] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 70
[    0.495398] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
[    0.502098] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
[    0.505523] hub 1-0:1.0: USB hub found
[    0.508416] hub 1-0:1.0: 1 port detected
[    0.512268] wrn: hcd is not enable, need not start hcd
[    0.513660] [sw_hcd0]: sw_usb_host0_disable start
[    0.519672] -------sw_hcd0_soft_disconnect---------
[    0.522654] is_on = 0, hcd0_set_vbus_cnt = 0
[    0.525705] [sw_hcd_host0]: Set USB Power Off
[    0.529450] wrn: hcd is not enable, need not stop hcd
[    0.530513] [sw_hcd0]: close_usb_clock
[    0.532975] [sw_hcd0]: sw_usb_host0_disable end
[    0.536157] [sw_udc]: udc_init: version 20080411
[    0.542554] NET: Registered protocol family 2
[    0.559095] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.565997] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.573489] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[    0.580247] TCP: Hash tables configured (established 131072 bind 65536)
[    0.582448] TCP: reno registered
[    0.587327] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.592663] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.596263] NET: Registered protocol family 1
[    0.601503] RPC: Registered named UNIX socket transport module.
[    0.605212] RPC: Registered udp transport module.
[    0.608870] RPC: Registered tcp transport module.
[    0.614271] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.618845] Trying to unpack rootfs image as initramfs...
[    0.864660] Freeing initrd memory: 3564K
[    0.870135] audit: initializing netlink socket (disabled)
[    0.873918] type=2000 audit(0.860:1): initialized
[    0.878269] highmem bounce pool size: 64 pages
[    0.890151] VFS: Disk quotas dquot_6.5.2
[    0.895708] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.902912] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.908451] NFS: Registering the id_resolver key type
[    0.912975] NTFS driver 2.1.30 [Flags: R/W].
[    0.916241] fuse init (API version 7.18)
[    0.920896] JFS: nTxBlock = 6981, nTxLock = 55850
[    0.937363] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[    0.941585] Btrfs loaded
[    0.944406] msgmni has been set to 1217
[    0.951836] alg: No test for stdrng (krng)
[    0.958560] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.961451] io scheduler noop registered
[    0.964713] io scheduler deadline registered
[    0.968406] io scheduler cfq registered (default)
[    0.973276] sunxi disp driver loaded (/dev/disp api 1.0)
[    0.978812] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.983440] [uart]: used uart info.: 0x01
[    0.988126] [uart]: serial probe 0 irq 33 mapbase 0x01c28000
[    1.014381] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
[    1.016981] console [ttyS0] enabled
[    1.019585] G2D: drv_g2d_init
[    1.024311] G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
[    1.027538] G2D: head:c9000000,tail:ca000000
[    1.030878] G2D: Module initialized.major:250
[    1.039919] brd: module loaded
[    1.045881] loop: module loaded
[    1.049231] [NAND] nand driver version: 0x2 0x9
[    1.106872] Dev Sunxi softw311 nand magic does not match for MBR 1: softw411
[    1.112881] Dev Sunxi softw311 nand magic does not match for MBR 2:         
[    1.118921] Dev Sunxi softw311 nand magic does not match for MBR 3:         
[    1.124937] Dev Sunxi softw311 nand magic does not match for MBR 4:         
[    1.132670] Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.
[    1.142572] Dev Sunxi softw411 nand: part 1, start 32768, size 131072
[    1.148195] Dev Sunxi softw411 nand: part 2, start 163840, size 6291456
[    1.153851] Dev Sunxi softw411 nand: part 3, start 6455296, size 1523712
[    1.156400]  nand: nand1 nand2 nand3
[    1.159583] [NAND]nand driver, ok.
[    1.165825] pwm-sunxi: pwm0 configured - period: 20, duty_percent: 50, duty: 10
[    1.172139] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
[    1.176649] ahci: SSS flag set, parallel bus scan disabled
[    1.184058] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    1.190955] sw_ahci sw_ahci.0: flags: ncq sntf stag pm led clo only pio slum part ccc
[    1.194349] scsi0 : sw_ahci_platform
[    1.201579] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[    1.205586] [spi-err] Get spi devices number failed
[    1.210286] [spi-err] register spi devices board info failed
[    1.219781] spi: cannot find any using configuration for                     all 4 spi controllers, return directly!
[    1.225883] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    1.230659] Fixed MDIO Bus: probed
[    1.234038] sunxi_emac Using mii phy on PortA
[    1.248777] sunxi_emac Using MAC from SID: 02:ce:07:c1:82:b7
[    1.255243] emac_init fetch emac using configuration failed
[    1.257691] gmac driver is disabled
[    1.260914] PPP generic driver version 2.4.2
[    1.264856] PPP BSD Compression module registered
[    1.268862] PPP Deflate Compression module registered
[    1.275983] PPP MPPE Compression module registered
[    1.279392] NET: Registered protocol family 24
[    1.285518] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.290730] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.293193] [sw-ehci1]: open clock
[    1.315869] [sw-ehci1]: Set USB Power ON
[    1.322307] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.328553] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
[    1.332964] sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
[    1.353231] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
[    1.356594] hub 2-0:1.0: USB hub found
[    1.359489] hub 2-0:1.0: 1 port detected
[    1.362145] [sw-ohci1]: open clock
[    1.388288] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    1.394514] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
[    1.398840] sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
[    1.466199] hub 3-0:1.0: USB hub found
[    1.469084] hub 3-0:1.0: 1 port detected
[    1.471742] [sw-ehci2]: open clock
[    1.494415] [sw-ehci2]: Set USB Power ON
[    1.500852] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.507083] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
[    1.511451] sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
[    1.533228] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
[    1.535853] ehci_irq: port change detect
[    1.539064] hub 4-0:1.0: USB hub found
[    1.541991] hub 4-0:1.0: 1 port detected
[    1.544607] [sw-ohci2]: open clock
[    1.553258] ata1: SATA link down (SStatus 0 SControl 300)
[    1.570758] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    1.577086] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
[    1.581391] sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
[    1.646257] hub 5-0:1.0: USB hub found
[    1.649150] hub 5-0:1.0: 1 port detected
[    1.653438] Initializing USB Mass Storage driver...
[    1.658570] usbcore: registered new interface driver usb-storage
[    1.662144] USB Mass Storage support registered.
[    1.667113] usbcore: registered new interface driver ums-alauda
[    1.672124] usbcore: registered new interface driver ums-cypress
[    1.677148] usbcore: registered new interface driver ums-datafab
[    1.682321] usbcore: registered new interface driver ums_eneub6250
[    1.687337] usbcore: registered new interface driver ums-freecom
[    1.692250] usbcore: registered new interface driver ums-isd200
[    1.697350] usbcore: registered new interface driver ums-jumpshot
[    1.702174] usbcore: registered new interface driver ums-karma
[    1.707276] usbcore: registered new interface driver ums-onetouch
[    1.712303] usbcore: registered new interface driver ums-realtek
[    1.717240] usbcore: registered new interface driver ums-sddr09
[    1.722154] usbcore: registered new interface driver ums-sddr55
[    1.726996] usbcore: registered new interface driver ums-usbat
[    1.731736] mousedev: PS/2 mouse device common for all mice
[    1.737411] ===========================hv_keypad_init=====================
[    1.740810] ========HV Inital ===================
[    1.744752] tkey_fetch_sysconfig_para: tkey_unused.
[    1.751965] hv_keypad_init: after fetch_sysconfig_para:  normal_i2c: 0x0. normal_i2c[1]: 0x0
[    1.757084] sunxi-rtc sunxi-rtc: Warning: RTC time is wrong!
[    1.762360] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
[    1.764885] i2c /dev entries driver
[    1.768529] config i2c gpio with gpio_config api
[    1.774176] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
[    1.779983] axp_mfd 0-0034: AXP internal temperature monitoring enabled
[    1.784651] i2c i2c-0: Invalid probe address 0x00
[    1.787706] I2C: i2c-0: AW16XX I2C adapter
[    1.791085] config i2c gpio with gpio_config api
[    1.795081] i2c i2c-1: Invalid probe address 0x00
[    1.798138] I2C: i2c-1: AW16XX I2C adapter
[    1.800879] [cedar dev]: install start!!!
[    1.803512] ehci_irq: port change detect
[    1.806576] [cedar dev]: install end!!!
[    1.809975] [tt]----- avs_dev driver load... ----
[    1.813577] [tt]-----      register iomem      ----
[    1.817238] [tt]--- avs_dev driver load ok!! -----
[    1.818991] [ace_drv] start!!!
[    1.821389] [ace_drv] init end!!!
[    1.823055] [pa_drv] start!!!
[    1.825287] [pa_drv] init end!!!
[    1.827668] axp20_ldo1: 1300 mV
[    1.832903] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
[    1.838186] axp20_ldo3: 700 <--> 3500 mV at 2800 mV
[    1.843554] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
[    1.848903] axp20_buck2: 700 <--> 2275 mV at 1450 mV
[    1.855463] somebody is trying to set dcdc3 range to (1300000, 1300000) uV
[    1.860488] but we keep dcdc3 = 1250000 uV from the bootloader
[    1.863105] The port change to OHCI now!
[    1.867376] axp20_buck3: 700 <--> 3500 mV at 1250 mV
[    1.872265] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
[    1.881878] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
[    1.900110] axp20_ldo2: Failed to create debugfs directory
[    1.903312] incomplete xfer (0x20)
[    1.905569] incomplete xfer (0x20)
[    1.907820] incomplete xfer (0x20)
[    1.910069] incomplete xfer (0x20)
[    1.912348] incomplete xfer (0x20)
[    1.914598] incomplete xfer (0x20)
[    1.916848] incomplete xfer (0x20)
[    1.919097] incomplete xfer (0x20)
[    1.921365] incomplete xfer (0x20)
[    1.923703] incomplete xfer (0x20)
[    1.926038] incomplete xfer (0x20)
[    1.928371] incomplete xfer (0x20)
[    1.930705] incomplete xfer (0x20)
[    1.933052] incomplete xfer (0x20)
[    1.935386] incomplete xfer (0x20)
[    1.937719] incomplete xfer (0x20)
[    1.940053] incomplete xfer (0x20)
[    1.942397] incomplete xfer (0x20)
[    1.946371] device-mapper: uevent: version 1.0.3
[    1.954139] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.959080] device-mapper: multipath: version 1.3.2 loaded
[    1.964596] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.970164] device-mapper: multipath queue-length: version 0.1.0 loaded
[    1.975746] device-mapper: multipath service-time: version 0.2.0 loaded
[    1.979195] cpuidle: using governor ladder
[    1.982096] cpuidle: using governor menu
[    1.984413] [mmc-msg] sw_mci_init
[    1.990133] [mmc-msg] MMC host used card: 0x1, boot card: 0x0, io_card 0
[    1.995379] [mmc-msg] sdc0 set round clock 400000, src 24000000
[    2.003630] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    2.011846] [mmc-msg] sdc0 Probe: base:0xf056a000 irq:64 sg_cpu:f056c000(4fc00000) ret 0.
[    2.016443] [mmc_pm]: failed to fetch sdio card configuration!
[    2.018867] sunxi_leds driver init
[    2.022965] Registered led device: green:ph20:led1
[    2.026731] Registered led device: blue:ph21:led2
[    2.031736] ledtrig-cpu: registered to indicate activity on CPUs
[    2.036984] usbcore: registered new interface driver usbhid
[    2.039778] usbhid: USB HID core driver
[    2.042515] ashmem: initialized
[    2.046144] logger: created 256K log 'log_main'
[    2.049924] logger: created 256K log 'log_events'
[    2.053703] logger: created 256K log 'log_radio'
[    2.057496] logger: created 256K log 'log_system'
[    2.064313] [SPDIF] [spdif_para] isn't defined or spdif_used=0
[    2.067112] [I2S-0] Entered sunxi_i2s_init
[    2.074845] [I2S-0] sunxi-i2s cannot find any using configuration for controllers, return directly!
[    2.082602] [I2S-0] sndi2s cannot find any using configuration for controllers, return directly!
[    2.085695] [I2S-0] Entered sunxi_sndi2s_init
[    2.089135] IPv4 over IPv4 tunneling driver
[    2.091951] TCP: bic registered
[    2.094227] TCP: cubic registered
[    2.096757] TCP: westwood registered
[    2.099373] TCP: highspeed registered
[    2.101678] TCP: hybla registered
[    2.103862] TCP: htcp registered
[    2.106131] TCP: vegas registered
[    2.108313] TCP: veno registered
[    2.110842] TCP: scalable registered
[    2.112866] TCP: lp registered
[    2.115050] TCP: yeah registered
[    2.117579] TCP: illinois registered
[    2.120801] Initializing XFRM netlink socket
[    2.124922] NET: Registered protocol family 10
[    2.129476] NET: Registered protocol family 17
[    2.132976] NET: Registered protocol family 15
[    2.137630] [mmc_pm]: No sdio card, please check your config !!
[    2.141298] Registering the dns_resolver key type
[    2.143462] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[    2.152016] Registering SWP/SWPB emulation handler
[    2.156653] axp20_buck2: Failed to create debugfs directory
[    2.162808] [cpu_freq] INF:-------------------V-F Table-------------------
[    2.167881] [cpu_freq] INF:voltage = 1450mv frequency = 1008MHz
[    2.172926] [cpu_freq] INF:voltage = 1425mv frequency =  912MHz
[    2.177983] [cpu_freq] INF:voltage = 1350mv frequency =  864MHz
[    2.183028] [cpu_freq] INF:voltage = 1250mv frequency =  720MHz
[    2.188085] [cpu_freq] INF:voltage = 1150mv frequency =  528MHz
[    2.193130] [cpu_freq] INF:voltage = 1100mv frequency =  312MHz
[    2.198186] [cpu_freq] INF:voltage = 1050mv frequency =  144MHz
[    2.203231] [cpu_freq] INF:voltage = 1000mv frequency =    0MHz
[    2.208628] usb 5-1: new full-speed USB device number 2 using sw-ohci
[    2.214464] [cpu_freq] INF:-----------------------------------------------
[    2.224262] [cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 912MHz, min freq: 720MHz
[    2.228252] registered taskstats version 1
[    2.997781] [mmc-msg] mmc 0 detect change, present 1
[    3.175259] Console: switching to colour frame buffer device 128x37
[    3.195179] I2C: i2c-2: HDMI I2C adapter
[    3.224108] axp20_buck3: incomplete constraints, leaving on
[    3.228883] axp20_buck2: incomplete constraints, leaving on
[    3.233608] axp20_ldo4: incomplete constraints, leaving on
[    3.238303] axp20_ldo3: incomplete constraints, leaving on
[    3.242990] axp20_ldo2: incomplete constraints, leaving on
[    3.246144] console [netcon0] enabled
[    3.249631] netconsole: network logging started
[    3.253852] otg_wakelock_init: No USB transceiver found
[    3.255896] ALSA device list:
[    3.258949]   #0: sunxi-CODEC  Audio Codec
[    3.262168] Freeing init memory: 224K
[    3.328696] systemd-udevd[90]: starting version 215
[    3.497415] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    3.499883] [mmc-msg] sdc0 power on
[    3.527303] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    3.532237] [mmc-msg] sdc0 set round clock 400000, src 24000000
[    3.604840] [mmc-err] smc 0 err, cmd 52,  RTO
[    3.609229] [mmc-err] smc 0 err, cmd 52,  RTO
[    3.617736] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    3.641091] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    3.650092] [mmc-err] smc 0 err, cmd 5,  RTO
[    3.654246] [mmc-err] smc 0 err, cmd 5,  RTO
[    3.658383] [mmc-err] smc 0 err, cmd 5,  RTO
[    3.662488] [mmc-err] smc 0 err, cmd 5,  RTO
[    3.671663] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    3.681199] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    3.693234] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    3.730886] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[    3.743672] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[    3.748990] [mmc-msg] sdc0 set round clock 42857143, src 600000000
[    3.812706] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[    3.817231] mmc0: new high speed SDHC card at address 0007
[    3.821754] mmcblk0: mmc0:0007 SD16G 14.4 GiB
[    3.825301]  mmcblk0: p1
[    4.719581] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
[    5.244932] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    5.249483] systemd[1]: Detected architecture 'arm'.
[    5.270269] systemd[1]: Set hostname to <dasys>.
[    5.888333] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    5.897182] systemd[1]: Expecting device dev-ttyS0.device...
[    5.904930] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    5.911952] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.916707] systemd[1]: Starting Remote File Systems (Pre).
[    5.922464] systemd[1]: Reached target Remote File Systems (Pre).
[    5.930506] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    5.940298] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.944397] systemd[1]: Starting Encrypted Volumes.
[    5.949406] systemd[1]: Reached target Encrypted Volumes.
[    5.956634] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    5.963919] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.966917] systemd[1]: Starting Paths.
[    5.970858] systemd[1]: Reached target Paths.
[    5.974318] systemd[1]: Starting Root Slice.
[    5.978724] systemd[1]: Created slice Root Slice.
[    5.983171] systemd[1]: Starting User and Session Slice.
[    5.988759] systemd[1]: Created slice User and Session Slice.
[    5.993324] systemd[1]: Starting Delayed Shutdown Socket.
[    5.998892] systemd[1]: Listening on Delayed Shutdown Socket.
[    6.004703] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    6.011489] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.016258] systemd[1]: Starting Journal Socket (/dev/log).
[    6.022000] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.026319] systemd[1]: Starting udev Control Socket.
[    6.031421] systemd[1]: Listening on udev Control Socket.
[    6.035591] systemd[1]: Starting udev Kernel Socket.
[    6.040564] systemd[1]: Listening on udev Kernel Socket.
[    6.044428] systemd[1]: Starting Journal Socket.
[    6.049158] systemd[1]: Listening on Journal Socket.
[    6.052898] systemd[1]: Starting System Slice.
[    6.057649] systemd[1]: Created slice System Slice.
[    6.062973] systemd[1]: Started File System Check on Root Device.
[    6.067970] systemd[1]: Starting system-serial\x2dgetty.slice.
[    6.074277] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    6.078388] systemd[1]: Starting system-getty.slice.
[    6.083777] systemd[1]: Created slice system-getty.slice.
[    6.089237] systemd[1]: Starting Increase datagram queue length...
[    6.165376] systemd[1]: Starting Restore / save the current clock...
[    6.193046] systemd[1]: Started Set Up Additional Binary Formats.
[    6.202983] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.225459] systemd[1]: Mounting POSIX Message Queue File System...
[    6.244350] systemd[1]: Starting udev Coldplug all Devices...
[    6.261112] systemd[1]: Mounted Huge Pages File System.
[    6.291965] systemd[1]: Starting Load Kernel Modules...
[    6.315328] systemd[1]: Mounting Debug File System...
[    6.353555] systemd[1]: Starting LSB: Set keymap...
[    6.384310] systemd[1]: Starting Slices.
[    6.394810] systemd[1]: Reached target Slices.
[    6.397353] Bluetooth: Core ver 2.16
[    6.400921] NET: Registered protocol family 31
[    6.407177] Bluetooth: HCI device and connection manager initialized
[    6.411021] Bluetooth: HCI socket layer initialized
[    6.415114] Bluetooth: L2CAP socket layer initialized
[    6.418951] systemd[1]: Mounted Debug File System.
[    6.422868] Bluetooth: SCO socket layer initialized
[    6.432596] systemd[1]: Mounted POSIX Message Queue File System.
[    6.436004] Bluetooth: HCI UART driver ver 2.2
[    6.439752] Bluetooth: HCI H4 protocol initialized
[    6.443726] Bluetooth: HCI BCSP protocol initialized
[    6.447398] Bluetooth: HCILL protocol initialized
[    6.451333] Bluetooth: HCIATH3K protocol initialized
[    6.466969] Bluetooth: RFCOMM TTY layer initialized
[    6.471079] Bluetooth: RFCOMM socket layer initialized
[    6.473938] Bluetooth: RFCOMM ver 1.11
[    6.478901] systemd[1]: Started Increase datagram queue length.
[    6.490992] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    6.496401] systemd[1]: Started Restore / save the current clock.
[    6.511146] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.526872] input: sunxi-ir as /devices/virtual/input/input1
[    6.530931] IR Initial OK
[    6.544883] ===========================ft5x_ts_init=====================
[    6.547610] ctp_fetch_sysconfig_para.
[    6.557013] ctp_fetch_sysconfig_para: after: ctp_twi_addr is 0x38, dirty_addr_buf: 0x38. dirty_addr_buf[1]: 0xfffe
[    6.565782] systemd[1]: Started LSB: Set keymap.
[    6.573162] ctp_fetch_sysconfig_para: ctp_twi_id is 1.
[    6.577703] ctp_fetch_sysconfig_para: screen_max_x = 1024.
[    6.582151] ctp_fetch_sysconfig_para: screen_max_y = 600.
[    6.588937] ctp_fetch_sysconfig_para: revert_x_flag = 0.
[    6.593336] ctp_fetch_sysconfig_para: revert_y_flag = 1.
[    6.598039] ctp_fetch_sysconfig_para: exchange_x_y_flag = 0.
[    6.605691] ft5x_ts_init: after fetch_sysconfig_para:  normal_i2c: 0x38. normal_i2c[1]: 0xfffe
[    6.611146] ctp_init_platform_resource: tp_reset request gpio fail!
[    6.616672] ctp_init_platform_resource: No power port feature present.
[    6.618169] ctp_wakeup.
[    6.648015] systemd[1]: Started udev Coldplug all Devices.
[    6.652168] systemd[1]: Time has been changed
[    6.658755] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.684615] systemd[1]: Starting Syslog Socket.
[    6.693712] systemd[1]: Listening on Syslog Socket.
[    6.697885] systemd[1]: Starting Journal Service...
[    6.719894] systemd[1]: Started Journal Service.
[    6.761392] incomplete xfer (0x20)
[    6.767305] ctp_detect: Detected chip ft5x_ts at adapter 1, address 0x38
[    6.771100] ====ft5x_ts_probe begin=====. 
[    6.779763] input: ft5x_ts as /devices/platform/sunxi-i2c.1/i2c-1/1-0038/input/input2
[    6.785092] ctp_set_irq_mode: config gpio to int mode.
[    6.791704] ctp_set_irq_mode, 225: gpio_int_info, port = 8, port_num = 7.
[    6.793690]  INTERRUPT CONFIG
[    6.796466] ==ft5x_ts_probe over =
[    7.161709] systemd-udevd[168]: starting version 215
[    7.959454] usbcore: registered new interface driver usbserial
[    7.983151] usbcore: registered new interface driver usbserial_generic
[    7.990314] USB Serial support registered for generic
[    8.006431] usbserial: USB Serial Driver core
[    8.029524] usbcore: registered new interface driver cp210x
[    8.053960] USB Serial support registered for cp210x
[    8.083740] cp210x 5-1:1.0: cp210x converter detected
[    8.284596] usb 5-1: reset full-speed USB device number 2 using sw-ohci
[    8.501175] usb 5-1: cp210x converter now attached to ttyUSB0
[    8.548712] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[    9.195839] Adding 131068k swap on /var/swap.  Priority:-1 extents:3 across:507900k SS
[    9.954183] systemd-journald[166]: Received request to flush runtime journal from PID 1
[   10.384183] sunxi_emac sunxi_emac.0: eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[   13.099204] Warning: this sunxi disp driver will see significant redesign.
[   13.104271] Applications using /dev/disp directly will break.
[   13.110625] For more information visit: http://linux-sunxi.org/Sunxi_disp_driver
[   13.134804] [DISP] layer allocated: 0,101
[   13.223462] UMP<2>: Inserting UMP device driver. Compiled: Jul  5 2016, time: 16:21:02
[   13.246185] UMP<2>: dma_set_mask_and_coherent calling
[   13.267944] UMP<2>: dma_set_mask_and_coherent result=-5
[   13.295120] UMP<2>: dma_set_mask_and_coherent failed
[   13.313618] UMP<2>: Using CMA memory backend, allocation limit: 134217728
[   13.333402] UMP: UMP device driver  loaded
[   13.384919] Mali: permit MALI_IOC_MEM_MAP_EXT ioctl for framebuffer (paddr=0x4A000000, size=33554432)
[   13.404349] mali: use config clk_div 1
[   13.416015] mali: clk_div 1
[   13.416844] Mali: mali clock set completed, clock is  312000000 Hz
[   13.446371] mali: use config clk_div 1
[   13.448137] mali: clk_div 1
[   13.457979] Mali: mali clock set completed, clock is  312000000 Hz
[   13.473701] Mali: Mali device driver loaded
[   13.549367] [drm] Initialized drm 1.1.0 20060810
[   13.583149] Mali DRM initialize, driver name: mali_drm, version 2.1
[   13.603496] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0
[   13.615986] Mali DRM initialize, driver name: mali_drm, version 2.1
[   13.644862] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1
[   13.687580] UMP<2>: New session opened
[   20.781877] eth0: no IPv6 routers present
[   32.658073] UMP<2>: New session opened
[   34.247958] ADDRCONF(NETDEV_UP): bond0: link is not ready
[  376.997569] EXT4-fs (nand2): mounted filesystem with ordered data mode. Opts: (null)
root@dasys:/home/roman#