Author Topic: Cubieboard4 How edit system configuration [SOLVED]  (Read 1580 times)

Offline Gabro84

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Cubieboard4 How edit system configuration [SOLVED]
« on: September 07, 2015, 06:20:47 pm »
I can edit file /lichee/tools/pack/chips/sun9iw1p1/configs/cubieboard4/sys_config.fex and rebuild android.
And I think it will work. But i dont want constantly rebuild system.
Now i try use guide: http://docs.cubieboard.org/tutorials/common/edit_the_system_configuration
but, at first, directory /dev/block/ dont consist 'nanda' device. In my case directory contains files:
by-name
loop0
loop1
loop2
loop3
loop4
loop5
loop6
loop7
mmcblk0
mmcblk0boot0
mmcblk0boot1
mmcblk0p1
mmcblk0p10
mmcblk0p11
mmcblk0p12
mmcblk0p2
mmcblk0p3
mmcblk0p5
mmcblk0p6
mmcblk0p7
mmcblk0p8
mmcblk0p9
platform
vold

I suppose that device nandX=mmcblk0pX.
Secondly, when i try execute:
 mount -t vfat /dev/block/mmcblk0pX /mnt/tmp
I receive an error:
mount: Device or resource busy
for any mmcblk0pX devices.
What am I doing wrong?
« Last Edit: September 09, 2015, 05:41:08 pm by Gabro84 »


Offline premoboss

  • Jr. Member
  • **
  • Posts: 51
  • Karma: +2/-0
    • View Profile
Re: Cubieboard4 How edit system configuration
« Reply #2 on: September 09, 2015, 11:04:22 am »
As far as I know, mmcblkxxxx refer to uSD, nandx refere to soldered nand flash: they are two different things. Maybe you must enable nand support into kernel?

Offline Gabro84

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Re: Cubieboard4 How edit system configuration [SOLVED]
« Reply #3 on: September 09, 2015, 05:39:43 pm »
Thanks allen! This is what I was looking for.