Author Topic: How to create a linux nand img for livesuite for cubietruck  (Read 4117 times)

Offline ayman_hendawy

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
How to create a linux nand img for livesuite for cubietruck
« on: January 16, 2015, 03:56:24 am »
Hi,

I tried many guides, to build a linux based kernel to get nand img for livesuite, but didn't get to any successful guide, most of them seam to be out of date, I have compiled successfully the kernel source from https://github.com/cubieboard/linux-sunxi,
following this guide,
http://linux-sunxi.org/Linux_Kernel#Compilation

but how to pack this output to an nand img for livesuite, I have tried many guides as following but get nothing,
http://linux-sunxi.org/LiveSuit_images     ----- seam to work, but how to use this tools.
http://www.cubieforums.com/index.php?topic=2540.0     ----seam out of date, as I can't find linux-sdk-tools repository.   

Kindly any hints here.

Offline ayman_hendawy

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: How to create a linux nand img for livesuite for cubietruck
« Reply #1 on: January 20, 2015, 12:27:07 am »
I hope to get any reply here, as still stuck  :-\

Offline pullmoll

  • Newbie
  • *
  • Posts: 8
  • Karma: +0/-0
    • View Profile
    • My project(s) on github
Re: How to create a linux nand img for livesuite for cubietruck
« Reply #2 on: February 14, 2015, 01:13:55 pm »
FWIW if you go up one directory on github, i.e. https://github.com/cubieboard/, you can see all their repositories. There you'll find a  linux-sdk-card-tools repo which is, what I suppose, the renamed linux-sdk-tools repo.

I got my cubietrack only yesterday and until now am playing around with a pre-built debian image, so it will take some time until I try to roll my own nand images.

Offline meltunali

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: How to create a linux nand img for livesuite for cubietruck
« Reply #3 on: August 03, 2015, 04:13:17 am »
still not possible? i am trying for a week and still not succeeded :(

Offline paulemma

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Re: How to create a linux nand img for livesuite for cubietruck
« Reply #4 on: October 31, 2015, 05:02:01 am »
Did you find al solution for your problem - creating a LiveSuit linux image ?

Offline beerstein

  • Full Member
  • ***
  • Posts: 143
  • Karma: +4/-0
  • two beers or not two beers that is the question
    • View Profile
Re: How to create a linux nand img for livesuite for cubietruck
« Reply #5 on: October 31, 2015, 07:03:11 am »
Hi guys: I spent days to install an operating system into NAND on a Cubieboard1
I still do not dare to temper around with a NAND install into my cubietruck, because I am afraid to brick
the whole thing.
I think there is an easier way than LiveSuit which is copying a working uSD card OS into NAND.
There are instructions somewhere here in the forum or on the net.

As far as I know, NAND can be installed via Linux on a PC or from a Windows machine. An understandable step by step instruction is needed her in our forum.