Author Topic: Qbee-X for A10 (ubuntu 12, nand.img + sd.img, working full-hd, multi DE)  (Read 45910 times)

Offline Tokka

  • Developer
  • Full Member
  • ***
  • Posts: 192
  • Karma: +16/-0
    • View Profile
Re: Qbee-X for A10 (ubuntu 12, nand.img + sd.img, working full-hd, multi DE)
« Reply #120 on: October 06, 2016, 08:01:44 am »
Test still in progress, i'm testing plex media server. Seams it works :)
CB1 (A10) - Qbee-X_TMC

Offline terotron

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Re: Qbee-X for A10 (ubuntu 12, nand.img + sd.img, working full-hd, multi DE)
« Reply #121 on: March 18, 2017, 08:24:28 pm »
I installed this firmware on nand, it works OK but I can not change to 1920x1080 resolution...
What I am missing?

I had same problem with resolution, but with SD version of image. My monitor AOC I2475Pxqu.
I have resolved it next way for HDMI 1920x1080 60Hz:
1) /etc/X11/xorg.conf
add line:
Code: [Select]
Modeline "1920x1080"  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsyncwhere digits generated from cvt for 1920 1080 60
And in Section "Screen" SubSection "Display"  line like this:
Code: [Select]
Modes "1920x1080" "1280x720"
2) /media/BOOT_SD/uEnv.txt (path maybe different)
Line extraargs:
Code: [Select]
extraargs=consoleblank=0 rootwait hdmi.audio=EDID:0 disp.screen0_output_type=3 disp.screen0_output_mode=EDID:1920x1080p60 sunxi_fb_mem_reserve=64Can try other sunxi_fb_mem_reserve.

3) /media/BOOT_SD/script.bin (path maybe different)
For edit need to convert bin to fex and then back to bin by bin2fex and fex2bin converters.
Section [disp_init]
Code: [Select]
screen0_output_type = 3
screen0_output_mode = 10

And finaly i can't understood how make correct and working list of display modes. Seems that xorg.conf work so badly :-\.
« Last Edit: March 18, 2017, 08:28:00 pm by terotron »

Offline Tokka

  • Developer
  • Full Member
  • ***
  • Posts: 192
  • Karma: +16/-0
    • View Profile
Re: Qbee-X for A10 (ubuntu 12, nand.img + sd.img, working full-hd, multi DE)
« Reply #122 on: March 20, 2017, 04:49:57 am »
Hi, try to remove the EDID param from uEnv.txt. Some monitor requires it, but others hate it  :-\
Quote
disp.screen0_output_mode=1920x1080p60
Xorg.conf too isn't working with some monitors, so try to comment all the resolution lines and reboot, hoping it will fix.
I almost have no more cubieboard, so i'm going from memory.
Regards
Tk
CB1 (A10) - Qbee-X_TMC

Offline terotron

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Re: Qbee-X for A10 (ubuntu 12, nand.img + sd.img, working full-hd, multi DE)
« Reply #123 on: March 26, 2017, 06:43:27 am »
Hi Tokka
Big thanks for your OS image. I run it from SSD disk and it works very fast. :D

Best regards from Russia ;)

Offline Tokka

  • Developer
  • Full Member
  • ***
  • Posts: 192
  • Karma: +16/-0
    • View Profile
Re: Qbee-X for A10 (ubuntu 12, nand.img + sd.img, working full-hd, multi DE)
« Reply #124 on: March 26, 2017, 06:57:44 am »
You'r welcome  :)
CB1 (A10) - Qbee-X_TMC