Author Topic: Cubieez, Debian 7.3 ARMHF CT&CB2 version NAND+SD + XBMC  (Read 148750 times)

Offline EdrZero

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Re: Cubieez, Debian 7.3 ARMHF CT&CB2 version NAND+SD + XBMC
« Reply #255 on: February 05, 2015, 12:07:23 pm »
Hi!, this is the first time I write in this forum.

I have a cubieboard2 and a cubietruck, both working with a capacitive hdmi screen.

I'm downloaded the images from the oficial page.

this is the screen ( http://www.chalk-elec.com/?page_id=1280#!/10-LCD-LVDS-bundle-with-capacitive-touchscreen-RaspberryPi-REFURBISHED/p/14647624/category=3094861 )

and the screen input works as an HID-MULTITOUCH.

it works fine in the cubieboard2 with http://dl.cubieboard.org/model/cubieboard2/Image/cubieez/cubieez-hdmi-v2.0/cubieez-cb2-card-hdmi-v2.0.img.7z

and also with  http://dl.cubieboard.org/software/a20-cubieboard/debian/nand/

but it doesn't work with any image for the cubietruck.

can you tell me where can i found a tutorial to enable hid-multitouch in cubietruck cubieez img?

thanks.

Offline actkk2000

  • Hero Member
  • *****
  • Posts: 570
  • Karma: +1/-11
    • View Profile
Re: Cubieez, Debian 7.3 ARMHF CT&CB2 version NAND+SD + XBMC
« Reply #256 on: February 05, 2015, 12:21:52 pm »
Download images for Cubietruck from here:
http://dl.cubieboard.org/model/cubietruck/Image/

Offline EdrZero

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Re: Cubieez, Debian 7.3 ARMHF CT&CB2 version NAND+SD + XBMC
« Reply #257 on: February 05, 2015, 03:43:40 pm »
thanks for the quick replay.


I have downloaded and tried all the Cubieez-hdmi images for Cubietruck from
http://dl.cubieboard.org/model/cubietruck/Image/

but not a single one of these images is able to recognize the touch input as in the images for cubieboard2.

how can i modified the cubieez-ct-nand-hdmi-v2.2.img.img to work with the usb hid-multitouch?

Offline uelkfr

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
    • View Profile
Re: Cubieez, Debian 7.3 ARMHF CT&CB2 version NAND+SD + XBMC
« Reply #258 on: February 09, 2015, 11:08:18 am »
Cubieez not booting then HDMI is not connected. I need headless solution with wifi only. When I connect HDMI it shows that is stuck on loading HDMI driver.

I will try to switch to VGA:
Code: [Select]
screen0_output_type = 4
hdmi_used = 0

Will it help? Do I'm switching properly?
« Last Edit: February 09, 2015, 11:54:48 am by uelkfr »

Offline armandob

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
    • Blog
Re: Cubieez, Debian 7.3 ARMHF CT&CB2 version NAND+SD + XBMC
« Reply #259 on: February 15, 2015, 07:10:08 am »
Hi,
i trying to build latest vdr and s2-liplianin media kernel modules but i need to use right kernel source.
could you give us info about git revision of kernel sources that you used, so we could
cloning linux-sunxi kernel from git specifying right release.


thanks
Armando

CubieNewb

  • Guest
Re: Cubieez, Debian 7.3 ARMHF CT&CB2 version NAND+SD + XBMC
« Reply #260 on: February 28, 2015, 09:50:41 pm »
For those who didn't know or can't find the links for download at www.cubieboard.org, the Cubieez 2.1 and 2.2, img files files may be downloaded here:

http://dl.cubieboard.org/model/cubietruck/Image/Cubieez/

They are NOT linked on the main download page at Cubieboard.org, where you'll find version 2.0:

http://dl.cubieboard.org/software/a20-cubietruck/



Offline oediv

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Re: Cubieez, Debian 7.3 ARMHF CT&CB2 version NAND+SD + XBMC
« Reply #261 on: March 31, 2015, 04:32:50 am »
hei guys,
maybe it was asked before but i dont find anything

possible to install BitTorrent Sync ?

thanks