Author Topic: Cubieez, Debian 7.3 ARMHF CT&CB2 version NAND+SD + XBMC  (Read 150850 times)

Offline rs3hc

  • Jr. Member
  • **
  • Posts: 55
  • Karma: +1/-0
    • View Profile
Re: Cubieez, Debian 7.3 ARMHF CT version (3.4.75 + MALI + G2D) NAND+SD
« Reply #15 on: January 21, 2014, 10:35:51 am »
Did this version have a static MAC address?

Offline ryan.c.gebhart

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
Re: Cubieez, Debian 7.3 ARMHF CT version (3.4.75 + MALI + G2D) NAND+SD
« Reply #16 on: January 21, 2014, 01:04:00 pm »
Hello, I am having trouble with the wifi on this image. Network manager shows me as connected to the correct network, however, the system is unable to use the connection (synaptic and iceweasel time out). ANy advice on how to make the connection useable?

Offline ahrovan

  • Full Member
  • ***
  • Posts: 120
  • Karma: +10/-0
    • View Profile
    • BirRoboticGroup

z001wttk

  • Guest
Re: Cubieez, Debian 7.3 ARMHF CT version (3.4.75 + MALI + G2D) NAND+SD
« Reply #18 on: January 21, 2014, 07:22:14 pm »
Hello,
I guess I must be an idiot :o! I can't seem to connect to my wifi with my ct. Wifi Radar sees my net work but can't get an ip address. I'm using dhcp and wpa2 personal, any hints? ???
You are not an idiot, just its static ip´s. :)
Hello, I am having trouble with the wifi on this image. Network manager shows me as connected to the correct network, however, the system is unable to use the connection (synaptic and iceweasel time out). ANy advice on how to make the connection useable?
Possible to install modules 3.4.61 in Cubieez ?

http://docs.cubieboard.org/tutorials/dvk521/documentations/a20/driver_porting_and_configuration
You must edit your network interface.
1. log in as root.
2. open /etc/network/interfaces
3. delete static configuration
4. paste this one:

Code: [Select]
auto eth0
iface eth0 inet dhcp

auto wlan0
iface wlan0 inet dhcp
wpa-ssid mynetworkname
wpa-psk mywpa/wpa2key

5. save it and reboot
6. log in as cubie or defaut, than it should work


Offline ryan.c.gebhart

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
Re: Cubieez, Debian 7.3 ARMHF CT version (3.4.75 + MALI + G2D) NAND+SD
« Reply #19 on: January 22, 2014, 01:31:04 pm »
Thanks for your help z001wttk with the wifi, I was able to get it working. Can anyone point me in the right direction in getting HDMI audio output working? Can't seem to find the correct device in alsamixer.

Offline ahrovan

  • Full Member
  • ***
  • Posts: 120
  • Karma: +10/-0
    • View Profile
    • BirRoboticGroup
Re: Cubieez, Debian 7.3 ARMHF CT version (3.4.75 + MALI + G2D) NAND+SD
« Reply #20 on: January 22, 2014, 02:11:46 pm »
debian-7-3-armhf-cb2ct have problem with character type,type "/" write "-" character >> what happens with character ??

Offline drkbcn

  • Full Member
  • ***
  • Posts: 101
  • Karma: +16/-1
    • View Profile
    • Cubieboard, Raspberry Pi & Linux
Re: Cubieez, Debian 7.3 ARMHF CT version (3.4.75 + MALI + G2D) NAND+SD
« Reply #21 on: January 22, 2014, 03:27:57 pm »
debian-7-3-armhf-cb2ct have problem with character type,type "/" write "-" character >> what happens with character ??

Go to a terminal and execute "cubie-config". Change your keyboard and locales.
Blog sobre Raspberry Pi, Cubieboard y Linux
http://belinuxmyfriend.blogspot.com

Offline drkbcn

  • Full Member
  • ***
  • Posts: 101
  • Karma: +16/-1
    • View Profile
    • Cubieboard, Raspberry Pi & Linux
Re: Cubieez, Debian 7.3 ARMHF CT version (3.4.75 + MALI + G2D) NAND+SD
« Reply #22 on: January 22, 2014, 03:28:41 pm »
Thanks for your help z001wttk with the wifi, I was able to get it working. Can anyone point me in the right direction in getting HDMI audio output working? Can't seem to find the correct device in alsamixer.

Change it with PulseAudio  8)
Blog sobre Raspberry Pi, Cubieboard y Linux
http://belinuxmyfriend.blogspot.com

Offline drkbcn

  • Full Member
  • ***
  • Posts: 101
  • Karma: +16/-1
    • View Profile
    • Cubieboard, Raspberry Pi & Linux
Re: Cubieez, Debian 7.3 ARMHF CT version (3.4.75 + MALI + G2D) NAND+SD
« Reply #23 on: January 22, 2014, 03:32:45 pm »
Did this version have a static MAC address?

Static MAC can be changed with uEnv.txt (mac_addr=XX.XX.XX.XX.XX.XX)
Blog sobre Raspberry Pi, Cubieboard y Linux
http://belinuxmyfriend.blogspot.com

Offline ryan.c.gebhart

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
Re: Cubieez, Debian 7.3 ARMHF CT version (3.4.75 + MALI + G2D) NAND+SD
« Reply #24 on: January 22, 2014, 03:40:12 pm »
Thanks for your help z001wttk with the wifi, I was able to get it working. Can anyone point me in the right direction in getting HDMI audio output working? Can't seem to find the correct device in alsamixer.

Change it with PulseAudio  8)

The only device I am able to select is "sunxi-CODEC", any other ideas?

Offline ahrovan

  • Full Member
  • ***
  • Posts: 120
  • Karma: +10/-0
    • View Profile
    • BirRoboticGroup
Re: Cubieez, Debian 7.3 ARMHF CT version (3.4.75 + MALI + G2D) NAND+SD
« Reply #25 on: January 22, 2014, 04:33:33 pm »
Problem with keyboard characters :: with cubie-config  can not solve that, especial characters in "english us" have problems.
*a4tech keyboard (kr-85)
*cb2 - sd

z001wttk

  • Guest
Re: Cubieez, Debian 7.3 ARMHF CT version (3.4.75 + MALI + G2D) NAND+SD
« Reply #26 on: January 22, 2014, 06:29:52 pm »
Thanks for your help z001wttk with the wifi, I was able to get it working. Can anyone point me in the right direction in getting HDMI audio output working? Can't seem to find the correct device in alsamixer.

Change it with PulseAudio  8)

The only device I am able to select is "sunxi-CODEC", any other ideas?

1.run PulseAudio Volume Control
2.select output devices
3.scroll down, than you can see sunxi-shdhdmi analog stereo
4.set as fallback (green button must be clicked)
5.close the window

Offline becario

  • Newbie
  • *
  • Posts: 30
  • Karma: +0/-0
    • View Profile
Re: Cubieez, Debian 7.3 ARMHF CT version (3.4.75 + MALI + G2D) NAND+SD
« Reply #27 on: January 22, 2014, 06:32:46 pm »
has anyone tested the film reproduction? Why it can't get fullscreen?

Offline drkbcn

  • Full Member
  • ***
  • Posts: 101
  • Karma: +16/-1
    • View Profile
    • Cubieboard, Raspberry Pi & Linux
Re: Cubieez, Debian 7.3 ARMHF CT version (3.4.75 + MALI + G2D) NAND+SD
« Reply #28 on: January 23, 2014, 05:54:39 am »
has anyone tested the film reproduction? Why it can't get fullscreen?

Don't worry about that because xvmc can't play videos at fullscreen resolution. I'm going to release XBMC binaries for A10, A20 and CT working smooth and without major problems this weekend  8)

If you don't want to wait for XBMC try this and let me know:
Code: [Select]
sudo apt-get install xserver-xorg-video-sunximali
sudo usermod -a -G video cubie

Set Gnome Mplayer to use xv at Preferences.
Blog sobre Raspberry Pi, Cubieboard y Linux
http://belinuxmyfriend.blogspot.com

Offline arrhenius

  • Jr. Member
  • **
  • Posts: 87
  • Karma: +1/-0
    • View Profile
Re: Cubieez, Debian 7.3 ARMHF CT version (3.4.75 + MALI + G2D) NAND+SD
« Reply #29 on: January 23, 2014, 10:27:19 am »

Don't worry about that because xvmc can't play videos at fullscreen resolution. I'm going to release XBMC binaries for A10, A20 and CT working smooth and without major problems this weekend  8)


GOOD NEWS!!!

does it play 720p? and 1080p?