Have you visited the Allwinner Chipset wiki? - http://linux-sunxi.org/
Started by slovenia, December 24, 2013, 03:23:11 pm
cd /usr/srcgit clone -b pat-3.4.79 https://github.com/patrickhwood/linux-sunxi cd /linux-sunxicurl https://raw.githubusercontent.com/igorpecovnik/Cubietruck-Debian/master/config/kernel.config > .configmake preparemake scriptsmake modules
make -C /lib/modules/3.4.79-sun7i+/build M=/root/test modulesmake: Entering directory `/usr/src/linux-sunxi' CC [M] /root/test/hello.o Building modules, stage 2. MODPOST 1 modules CC /root/test/hello.mod.o LD [M] /root/test/hello.ko
Error: could not insert module hello.ko: Invalid module formatdmesg: hello: no symbol version for module_layout
Quote from: slovenia on May 02, 2014, 01:01:05 am1. I have no experience with Plex Media Server but if it works on RasPI than it is possible to be installed on Cubieboard. My image included. Beware that if you want to run a media center (XBMC or similar) you will have troubles playing HD videos since drivers are not fully developed yet. 2 and 3. You can't flash this image directly to NAND. You have to create SD card, boot and transfer/mirror/rsync the content to NAND. Utility (installer) is included ... workaround (if trouble occurred) is described in first post.
QuoteThanks slovenia for your reply. I plan to use my CT as a headless home server (NAS, Plex Media Server, Cloud, etc.) I don't plan to run any media center or anything like that.
QuoteI tried to write this image version 1.9 using ImageWriter with success. My CT boots with no problem. I can ssh to it but can't see anything from my TV (connect via HDMI). I guess this is due to no memory reserve for video? I will try to install Plex Media Server to see if it works and will report back. I am new to Linux so not sure if I can get any luck.
QuoteThe second problem prevents the use of the blue LED.
QuoteVery good work. I hope you will improve it for a long time.I donated you a very big cup of coffee or tea to keep you awake for working hehe.
Quote from: jedie on May 05, 2014, 05:55:07 amI try now the update to "jessie".One "Problem" while dist-upgrade: ramlog is a own package and will be removes while updating.What's about "busybox-syslogd" witch IMHO also write into RAM only.
Quote from: slovenia on May 05, 2014, 06:25:05 amIf you do upgrade to jessy, ramlog fails? What if you install it manually? The package is here.
Quote from: jedie on May 05, 2014, 06:29:57 amQuote from: slovenia on May 05, 2014, 06:25:05 amIf you do upgrade to jessy, ramlog fails? What if you install it manually? The package is here.The dist-upgrade routine will remove the package.Think i can reinstall it... But why a own package, if busybox-syslogd exists? OK, busybox will be installed, too. But what's are the avertage of the own package?Btw. One point for the FAQ: How to disable WLAN My old solution was: to add iwconfig wlan0 txpower off to /etc/rc.localBut what's the best solution for this?
# install custom bashrccp $SRC/scripts/bashrc $DEST/output/sdcard/root/.bashrc
cat Cubietruck-Debian/scripts/bashrc >> /etc/bash.bashrc
Quote from: jedie on May 05, 2014, 06:29:57 amBtw. One point for the FAQ: How to disable WLAN My old solution was: to add iwconfig wlan0 txpower off to /etc/rc.localI add this to https://github.com/igorpecovnik/Cubietruck-Debian/wiki/FAQ#disable-wifi